WTB center pc of a 11-Bolt Vernier cam gear

Discussion in 'Manton Push Rods Top Alcohol Tech Questions' started by Cdn526, Jan 15, 2017.

  1. Cdn526

    Cdn526 Member

    Joined:
    Dec 12, 2006
    Messages:
    487
    Likes Received:
    3
    I use the 11-bolt Vernier 48T cam drive gear, and the center pc, that bolts to the cam w/ 3 of 3/8 bolts (& positioned by the two dowel pins of the cam), that the 48T gear bolts to, has several stripped thread holes.
    It's for our spare motor, so i'd rather not buy a new one from RCD for $240, if by chance someone has a real nice one collecting shop dust.
    Not a 60mm cam; std older style hemi, 54mm I think
    Could use a few of the little bolts too.
    Thanks!
    Clif
    cb@nitrobull.ca
     
    #1

Share This Page