WANTED: Center section, Noonan pan, Rocker arms, 11mm pulleys, minor bros mag drive, lifters, grid

Discussion in 'Noonan Classifieds' started by Soldierboy0098, Feb 1, 2020.

  1. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,332
    Likes Received:
    14
    WANTED:

    Strange Ultra 10" center section, 5.00 gears but may consider others, 1480 yoke.

    RCD aluminum 3.5" Wide pistol grip idler assy

    11mm 3.5" wide pulleys, center flange bottoms and std roots style (Non dowelled) tops

    Used MSD Power Grid

    RCD Minor brothers style front mag drive for Marmon clamp and 1/2" Drive.

    Dry sump oil pan for Noonan block w/ single #16 pickup.

    1-2 pairs of New or lightly used Cam FX 1" Lifters.

    1 Manton 1.8 Cast roller tipped rocker arm for7/16" adjuster

    1 Manton 1.7 Billet Exh roller tipped rocker for 7/16" adjuster

    Thanks,

    Trevor Sherwood

    727-3six4-4368
     
    #1
  2. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,332
    Likes Received:
    14
    Still looking for a used or inexpensive RCD minor brothers clamp on front mag drive w/ the 1/2" Hex drive. Also 56 tooth 11mm Center flange bolt on pulley as well as 30,31,32,33,34,and 35 tooth 11mm std roots style (Non doweled) non offset pulleys and possibly a pair or two of lightly used CamFX 1" hemi lifters. Thanks
     
    #2
  3. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,332
    Likes Received:
    14
    Roger that, still trying to go with used to save some cash but if I cannot find them you are who I am buying from. I got a 35 and 57 used so far but soon I may be buying the 56 new.
     
    #3
  4. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,332
    Likes Received:
    14
    Bump it up
     
    #4
  5. Brent

    Brent Member

    Joined:
    Nov 29, 2004
    Messages:
    96
    Likes Received:
    0
    #5
  6. reeper

    reeper Fuel Altered

    Joined:
    Jul 5, 2004
    Messages:
    99
    Likes Received:
    1
    I have center flange 11mm bottom pulley 53 tooth
    Larry Reep
    ph 512-6190999
     
    #6
  7. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,332
    Likes Received:
    14
    Hi Larry, needing a 56 tooth 1mm center flange bolt on bottom. Thanks
     
    #7

Share This Page