NHRA Legal Top Fuel Car For Sale and Nitro Parts

Discussion in 'Noonan Classifieds' started by kylewurtzel, Mar 26, 2022.

  1. kylewurtzel

    kylewurtzel TA/FC

    Joined:
    Feb 8, 2005
    Messages:
    654
    Likes Received:
    1
    This is a complete ready to race Hadman chassis. I don’t want to call it car because it’s not rolling but it is way more than just a chassis. Add your drive train, wings, fuel and clutch management, electronics and go racing. Those are the items that were removed and put on my new car. Everything else is there. I went 3.78 at 321mph in 2020 in it and a bunch of 3.80’s last year.
    Includes wings stand, titanium shroud and kidney plate, current maroon body, all levers , pedals, cables, fuel tank, line and manifold, carbon dash, seat, floor and foot box, lateral head pads, two belly pans, clutch dust tray, motor plates. I am sure I am missing a few things. Current chassis cert tag. This is a nice car! $15,000.

    Large triple t roll cage tool tray $700

    Earp fuel pump has 2 1.400 and 2 1.350 gears that makes it a 108 gallon pump. I don't have a top plate or shut offs. This was my pump that I ran for the last 3 years. $2000. If flows 89.5 gpm and 670 psi @3500rpm on the lucas oil flow bench. Freshened up by Ron Douglas

    Assorted Nitro Pistons

    20 new 567 compression diamond pistons. Gas port top ring. Just ordered these at the end of the year last year. They cost $90 each. Sell for $70 each.

    582 Compression diamond pistons
    6 new dyke top rings. $45 each
    10 used dyke top ring nice $20 each.

    598 compression cp carillo pistons
    8-New dyke top ring $45 each
    7 New gas ported top ring $50 each

    583 compression cp carillo pistons.
    30 new gas port top ring $50 each

    600 compression venolia
    18 new dyke top ring $45 each
    7 used gas port $20 each
    2 used dyke free with the 18.

    617 compression venolia
    17 used dyke top rings. $20 each

    OBO and Pick up in Indy or I can deliver the parts to a race.

    kyle
    574-527-8019
     
    #1
  2. kylewurtzel

    kylewurtzel TA/FC

    Joined:
    Feb 8, 2005
    Messages:
    654
    Likes Received:
    1
    Sorry I couldn’t edit my above post. This car will also work for afuel and here are the important dimensions I have been asked about. Don’t be afraid to make me an offer.

    54” foot box
    37” roll cage
    20” hoop
     
    #2
  3. kylewurtzel

    kylewurtzel TA/FC

    Joined:
    Feb 8, 2005
    Messages:
    654
    Likes Received:
    1
    New price on the chassis $12,500

    Pending payment on the pump and all of the cp pistons.

    All of the pistons are 4.187, 3.300, 1.156.
     
    #3
  4. kylewurtzel

    kylewurtzel TA/FC

    Joined:
    Feb 8, 2005
    Messages:
    654
    Likes Received:
    1
    The front half has 60 runs and the back half 80 runs and is a 300” car. Set up for a Chrisman Rearend and I can include Rearend plates. A wheelie bar is also included. New price $11,000
     
    #4

Share This Page