NEEDED. 3/8-24 pressure feed adjusters

Discussion in 'Manton Push Rods Top Alcohol Tech Questions' started by f3r-camaro, Feb 23, 2017.

  1. f3r-camaro

    f3r-camaro Member

    Joined:
    Aug 19, 2011
    Messages:
    49
    Likes Received:
    0
    i have a set of stage V intake rockers that have been modified for pressure feed oilingand I am looking for some 3/8-24 adjusters with 5/16 ball for spares ASAP

    THANKS
     
    #1
  2. TADHemiracer

    TADHemiracer Member

    Joined:
    Dec 9, 2010
    Messages:
    347
    Likes Received:
    13
    Not sure if those exact adjusters are available commercially or not but if you are in a hurry for replacements or spares, I would suggest to buy them new.
     
    #2
  3. TADHemiracer

    TADHemiracer Member

    Joined:
    Dec 9, 2010
    Messages:
    347
    Likes Received:
    13
    I have sets of used Stage V 1.7 ratio roller intake and roller exhaust with 7/16 adjuster threads I would consider sellling. They have oiling holes but not the pressure fed for the pressure fed adjusters.
     
    #3
  4. f3r-camaro

    f3r-camaro Member

    Joined:
    Aug 19, 2011
    Messages:
    49
    Likes Received:
    0
    Unfortunately I have been unable to find who makes the adjusters new

    And want to keep with the pressure feed
     
    #4
  5. aort

    aort Member

    Joined:
    Sep 26, 2010
    Messages:
    52
    Likes Received:
    0
    These are from Manton. Different lengths. Is that what you need?

    824-01 - 5/16 Ball 3/8 x 24 Thrd. w/Oil Hole H-13
    824-02 - 5/16 Ball 3/8 x 24 Thrd. w/Oil Hole H-13
    824-03 - 5/16 Ball 3/8 x 24 Thrd. w/Oil Hole H-13
     
    #5
  6. f3r-camaro

    f3r-camaro Member

    Joined:
    Aug 19, 2011
    Messages:
    49
    Likes Received:
    0
    No those are not the pressure feed ones I already talked with Manton and they don't make the ones I need
     
    #6

Share This Page