Misc Hemi Engine Parts sale - lots of new/used misc parts priced to move!

Discussion in 'Noonan Classifieds' started by Will Hanna, Mar 21, 2020.

  1. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,640
    Likes Received:
    109
    Engine Parts Sale -

    Bryant 4.150 double keyway billet Hemi crank. Small hairline crack in No. 4 main. I would run this as a spare if I needed to go to a race or two until I got another crank. $750 OBO


    Front accessories:
    RCD BAE/KB Crank trigger bracket, no slider - $50
    RCD BAE/KB Crank trigger bracket with slider $75
    RCD BAE/KB Pointer bracket - drop in style pointer (missing pointer) - $40
    RCD BAE/KB Pointer bracket - new style sliding pointer - with threaded slider for TDC optic - $100
    2 ea PSI Conical Bottom pulley clamp complete with crank bolt and balancer bolts - $95 ea
    2 ea PSI Conical Bottom pulley clamps no bolts - $50 ea


    PSI Blower studs:
    7 sets - 2.5" OAL aluminum - no nuts $55 set

    8mm Pulleys
    33 tooth RCD Magnesium - USED - $150
    2 ea - 37 tooth RCD Aluminum - USED - $75 ea
    71 tooth RCD Magnesium - USED - $150
    55 tooth RCD Magnesium - 1" offset - NEW - $200
    71 tooth PSI Aluminum - USED - $100

    14mm Pulleys
    31 tooth GT black anodized aluminum - USED - $65
    31 tooth HTD aluminum - USED - $50
    32 tooth HTD black anodized aluminum - .75 offset - USED - $65
    34 tooth HTD black anodized aluminum - USED $65

    14 mm belts:
    2 ea - 1610-65-PS GT - retail is $330, $250 ea or $450 for both

    Snouts:
    3.875" 10 bolt RCD roots snout - no drive flange, but has quill - $200

    Taylor Bags/Parts
    19" rear blower restraint strap - used, good condition - $25
    Taylor BAE FC Dry Sump Diaper - Very Good Condition USED - $350
    Taylor BAE Dragster Wet Sump Diaper - bottom header bracket mount- NEW $500

    Fuel system
    3 ea Normally Open Whitey Valves - $30 ea or $75 for all 3
    NOS Alky/Nitro solenoid - NEW - $100 (retails $180)
    Waterman .950 Gear set with end plates for nostalgia pump - USED - $200
    Waterman .750 gear set with end plates for Little Bertha pump - USED - $250
    Waterman .850 gears, no end plates - $100
    PSI stock opening to JBR front loader injector adaptor plate - USED - $75
    Down nozzle fuel rails, single nozzle for blown alcohol. These were for NRE heads. Complete with jumpers and Kinsler sprayer bodies. All NEW, close to $1500 invested, $950 OBO
    Single burst panel frame with used PSI burst panel - $20

    Pics available on request via text or email
    Will Hanna
    979.415.4959 (no calls/texts/messages after 9 p.m. CST)
    will.hanna@insidetopalcohol.com
     
    #1
    Last edited: Apr 6, 2020 at 11:08 AM
  2. GottaGoFaster

    GottaGoFaster Member

    Joined:
    Nov 17, 2016
    Messages:
    51
    Likes Received:
    1
    Hi Will, I'm interested in the pump extension, slider crank trigger bracket, and slider pointer bracket. Hopefully fit a KB stage 10? Could you send pics to outlaw_promod@yahoo.com? Thanks!
     
    #2
  3. nitrowannabe

    nitrowannabe Member

    Joined:
    Oct 9, 2006
    Messages:
    392
    Likes Received:
    16
    Email sent Will.
     
    #3

Share This Page