harmonic balancer

Discussion in 'Manton Push Rods Top Alcohol Tech Questions' started by bobt, Mar 7, 2018.

  1. bobt

    bobt Member

    Joined:
    May 30, 2017
    Messages:
    33
    Likes Received:
    0
    what are teams running for a balancer on the turbo and procharger cars. what company makes one for a psi or a double key crank
     
    #1
  2. turbo69camaro

    turbo69camaro Member

    Joined:
    Nov 26, 2007
    Messages:
    230
    Likes Received:
    6
  3. sammy christian

    Joined:
    May 29, 2013
    Messages:
    59
    Likes Received:
    2
  4. bobt

    bobt Member

    Joined:
    May 30, 2017
    Messages:
    33
    Likes Received:
    0
    thanks guys i'll check it out
     
    #4
  5. Dal Sangha

    Dal Sangha Member

    Joined:
    May 12, 2016
    Messages:
    30
    Likes Received:
    1
    Bob don’t bother calling anyone at ATI. They’re not much help. You need ATI part# 918442E. It will bolt up to an RCD degree wheel, splined or keyed. This way you use the degree wheels 4 magnets for your crank trigger pickup. Let me know if there is anything else you need to know. I’ve got an 8x hemi using Haltech EFI. Dal
     
    #5
  6. bobt

    bobt Member

    Joined:
    May 30, 2017
    Messages:
    33
    Likes Received:
    0
    thanks dal good info.
     
    #6
  7. SoDak

    SoDak Active Member

    Joined:
    Dec 29, 2006
    Messages:
    1,520
    Likes Received:
    3
    Does the blower pulley, like a 14mm or 8 mm, bolt directly to the front of the dampner?

    Which would mean the tapped holes in the dampner are the pulley bolt hole pattern
     
    #7

Share This Page