enderle fuel pump.........

Discussion in 'PSI Superchargers Tech Questions' started by mcfly, Jun 19, 2006.

  1. mcfly

    mcfly New Member

    Joined:
    Jan 30, 2005
    Messages:
    204
    Likes Received:
    1
    car runs to 1200' pump psi 120,then psi slowed to 90 for no real reason,back to service car,primed hat,wants to start but no fuel to the bv,remove pump,drive and all,looks good,turn pump w/cordless moves fuel,drive turns,cam button good.....what gives?will not push fuel to bv,I have run this same setup for 1 year w no problems.

    Mcfly
     
    #1
    mcfly, Jun 19, 2006
  2. Capt Crash

    Capt Crash Member

    Joined:
    Apr 17, 2004
    Messages:
    109
    Likes Received:
    0
    I had a similar problem, that ended up where a fuel check valve was stuck open. A drill will turn the pump fast enough, but the cranking speed of the engine alone was not enough to prime the pump. I would start there.

    Brian
     
    #2
    Capt Crash, Jun 19, 2006
  3. whosyrdady

    whosyrdady Super Comp

    Joined:
    Sep 22, 2004
    Messages:
    198
    Likes Received:
    0
    What kind of car are you running? Did you relocate fuel cell recently?
     
    #3
    whosyrdady, Jun 19, 2006
  4. mcfly

    mcfly New Member

    Joined:
    Jan 30, 2005
    Messages:
    204
    Likes Received:
    1
    enderle

    I found the inlet hose was collapsing........
     
    #4
    mcfly, Jun 20, 2006
  5. RBS

    RBS Authorized Merchant

    Joined:
    May 6, 2004
    Messages:
    1,095
    Likes Received:
    0
    Fuel Pump

    We Had A Customer With A Drag Boat Exact Problem. No Matter What We Did The Boat Speed Up. A Huge High Speed. Luckily The Motor Did Not Burn Itself Up.
     
    #5
    RBS, Jun 20, 2006
  6. shawn davis

    shawn davis Member

    Joined:
    Feb 27, 2004
    Messages:
    658
    Likes Received:
    0
    Question For Jr

    Jr Do You Sell The Aluminum Fuel Line Tubing Like You'd Run From The Tank To Pump Inlet? Bent At 90 Degrees?
     
    #6
    shawn davis, Jun 20, 2006
  7. RBS

    RBS Authorized Merchant

    Joined:
    May 6, 2004
    Messages:
    1,095
    Likes Received:
    0
    Tubing

    Sorry I Dont Have That Part I'd Check With A Chassis Builder As I Think They Would Be A Good Choice.
     
    #7
    RBS, Jun 20, 2006
  8. funnycarguy 230

    funnycarguy 230 New

    Joined:
    Jul 6, 2004
    Messages:
    388
    Likes Received:
    0
    I Bought Mind From Burns Stainless They Have It 90degrees And Straight
     
    #8
    funnycarguy 230, Jun 20, 2006
  9. mcfly

    mcfly New Member

    Joined:
    Jan 30, 2005
    Messages:
    204
    Likes Received:
    1
    enderle pump mods

    We will be offering a pump inlet size upgrade next week,will include re-machine of pump inlet size and special stainless steel inlet fitting to go to 1- 1/4 id hose.

    meziere enterprise
    760-746-3273
     
    #9
    mcfly, Jun 21, 2006
  10. Bob Meyer

    Bob Meyer Comp Eliminator

    Joined:
    May 13, 2003
    Messages:
    764
    Likes Received:
    36
    John; did you lose my number ?
    I have 1-1/4" 90's on the shelf, with the hi-buck silicone hose. (TIP : do not use black rubber)

    Ol' guy
     
    #10
    Bob Meyer, Jun 21, 2006
  11. eli

    eli Banned

    Joined:
    Dec 24, 2005
    Messages:
    1,657
    Likes Received:
    1
    Make sure you have a vent the size of the inlet line or at least 1 in inside diamater.
     
    #11
    eli, Jun 21, 2006
  12. mcfly

    mcfly New Member

    Joined:
    Jan 30, 2005
    Messages:
    204
    Likes Received:
    1
    Bob what about the pump inlet bore........this is where we will increase the ID
    will you be in Fontucky this w/e ?
     
    #12
    mcfly, Jun 21, 2006
  13. Performance Racing

    Performance Racing New Member

    Joined:
    Dec 24, 2004
    Messages:
    94
    Likes Received:
    0
    Home Depot or Lowes sells anodized aluminum tubing that works well in several sizes includind 1"
     
    #13
    Performance Racing, Jun 21, 2006
  14. Bob Meyer

    Bob Meyer Comp Eliminator

    Joined:
    May 13, 2003
    Messages:
    764
    Likes Received:
    36
    John; Saturday only. Balerina lessons Sunday.

    There is no such thing as too much fuel getting to the pump (up to 1.5 times the inlet diameter).
     
    #14
    Bob Meyer, Jun 21, 2006
  15. mcfly

    mcfly New Member

    Joined:
    Jan 30, 2005
    Messages:
    204
    Likes Received:
    1
    Getter' dun
     
    #15
    mcfly, Jun 22, 2006
  16. WADE RACING

    WADE RACING New Member

    Joined:
    Apr 3, 2005
    Messages:
    66
    Likes Received:
    0
    BOB MEYER a.k.a Ol Guy

    Please, Please, do not wound your torch holding hand pulling on your Tu Tu....I am still looking for Pauls e-mail address, If you have it I would appreciate a reply to lawade618@msn.com,


    Older than you,

    Larry
     
    #16
    WADE RACING, Jun 23, 2006
  17. shawn davis

    shawn davis Member

    Joined:
    Feb 27, 2004
    Messages:
    658
    Likes Received:
    0
    Line

     
    #17
    shawn davis, Jun 23, 2006

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM