Drivetrain parts, Lenco drive, Carbon driveshaft, Cans, Converters, coolers, ect..

Discussion in 'Noonan Classifieds' started by Soldierboy0098, Jan 12, 2018.

  1. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,252
    Likes Received:
    14
    Lenco drive unit (Ex Anderika) (No trans) with a ridiculous amount of spares including hard parts such as a valve body. Snyder bypass valve. Pro bell aluminum can or Steel can, DMPE (non cracking) aluminum flex plate, Spare Reactor flex plate. Trans cooling setup, Lenco 3 spd blanket (Not for Lenco drive but can be traded in towards one) and your choice of converter setups. With a Chance billet aluminum NXS converter and Spare half to make it non NXS $6,500 or with a Trans Specialties Steel converter that actually went slightly faster in TAFC $4,500, or with a Coan steel converter out of a roots BBC pro mod that went 4.20's for $3,900. Subtract $800 if you want the steel can. I can also send this into Snyder and have him complete it and assemble it with whatever gear sets you want as a 2 or 3 spd for whatever Mick would charge me. I will contact Mick and get a price for a serious inquirer but as a rough idea it would cost around $4,500 for a 3 spd.

    New in the box Browell steel can for Lenco drive/Hemi. Cost $1,400 new sell for $700. Was for a project that fell through.

    Spare trans cooling setup, Homemade but worked great, I just replaced all of the seals,gaskets on the pump, comes with 3 trans coolers daisy chained together, hoses/lines, threaded rods, a tilton pump, a large blower motor, and I can sell it with or without a cheap cart that it came with (Cart needs paint) $250+sh w/o the cart, $300+sh with it. Note with the cart it will be harder and more expensive to ship due to size.

    New PST Carbon drive shaft w/ 1480 U-Joint and Strange short yoke 45 5/8 center to center +/- 1/8" Was for 2 spd Lenco drive in my 63 Vette Pro mod, I run a 3 spd so it will not work for me. Cost $1,700 new will sell for $1,200 + sh

    See my other ads for a pro mod rolling chassis and engine/misc parts

    Calling, texting, or emailing is best as I may not catch the messages on ITA.

    Thanks,
    Trevor Sherwood
    727-3six4-436eight (Keeps auto dialers and scammers away)
    Soldierboy0098@yahoo.com
     
    #1
    Last edited: Jan 18, 2019
  2. anthony young

    anthony young New Member

    Joined:
    Dec 5, 2011
    Messages:
    18
    Likes Received:
    0
    Can you please send pics to aayoung392@yahoo for the tool tray thanks. Anthony
     
    #2
  3. Paul Vinyard

    Paul Vinyard New Member

    Joined:
    Aug 19, 2016
    Messages:
    19
    Likes Received:
    0
    #3
  4. Eastern Hustler

    Eastern Hustler New Member

    Joined:
    Nov 8, 2016
    Messages:
    17
    Likes Received:
    0
  5. top fuel

    top fuel New Member

    Joined:
    Apr 22, 2013
    Messages:
    27
    Likes Received:
    0
    hi interested in the pistons and tool tray you can call me at (918)366-6050 thanks
     
    #5
  6. Mike T

    Mike T Member

    Joined:
    Feb 24, 2006
    Messages:
    48
    Likes Received:
    0


    I’m very interested in the can. Can you send pics of the opening and depth measurement. mthomp392@yahoo.com or 951 314-6544
     
    #6
  7. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,252
    Likes Received:
    14
    Hi Mike, Just saw your message on here. Calling or emailing is always best but I will get you some pics of the can first thing tomorrow and give you a call. The opening is for a Lenco drive and the depth is std Lenco drive which should be 7.2" It is new in box. Thanks -Trev
     
    #7
  8. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,252
    Likes Received:
    14
    bump it up
     
    #8
  9. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,252
    Likes Received:
    14
    Lencodrive is staying, can and driveshaft still available.
     
    #9
  10. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,252
    Likes Received:
    14
    Can and driveshaft still available
     
    #10
  11. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,252
    Likes Received:
    14
    Bump it up, can and driveshaft still available
     
    #11
  12. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,252
    Likes Received:
    14
  13. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,252
    Likes Received:
    14
    New Browell Can still for sale
     
    #13
  14. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,252
    Likes Received:
    14
    Can and trans cooling setup still available
     
    #14
  15. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,252
    Likes Received:
    14
    Can and trans cooling setup is still available
     
    #15
  16. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,252
    Likes Received:
    14
    I have the Browell Can, Pro Bell Can, and Trans cooling setup still available.
     
    #16

Share This Page