1. aychar

    aychar New Member

    Joined:
    Nov 25, 2012
    Messages:
    3
    Likes Received:
    0
    Hi guys,

    Can anyone recommend a flex plate to suit a blown Hemi that has a ring gear on it to suit an onboard starter motor? My current set up has a ring gear on the convertor and we want to change this if possible. Any help would be great TIA
     
    #1
  2. Mike Canter

    Mike Canter Top Dragster

    Joined:
    Mar 10, 2004
    Messages:
    4,188
    Likes Received:
    87
    Three main companies make dependable flexplate, Meziere, CSR and DMPE Inc. The normal tooth count is 162 to fit inside the inner shield in the can. Sometimes you have to use an oversized pinion on the starter to make them mesh correctly which is available from Synder Motorsports. Synder also sells the Meziere flexplate.
     
    #2
  3. aychar

    aychar New Member

    Joined:
    Nov 25, 2012
    Messages:
    3
    Likes Received:
    0
    Thanks
     
    #3
  4. td3829mk

    td3829mk Member

    Joined:
    Dec 31, 2015
    Messages:
    125
    Likes Received:
    8
    x2. Give Mick a call, he will hook you up. I use a 162 CSR and CSR starter with oversized pinion gear. Works great.
     
    #4

Share This Page