Blower Belts, Fuel Pumps, Lenco Ratio's, MSD 44 Mag Ignition, Electrimotion and More

(2) Used 14 MM 1568-65-GT Carbon 112 Tooth Blower Belts (25 Runs) $150.00 Each

(1) New 14 MM 1568-65-GT Carbon 112 Tooth Blower Belt $200.00

(1) New 14 MM 1568-75-GT PS 112 Tooth Blower Belt $250.00

(1) Used MSD 8147 Pro Mag 44 Points Box $400.00

(1) Used MSD 8142 Pro Mag 44 Coil $300.00

(1) New MSD 8973 Mag Controller with Hand held programmer $350.00

(1) New Electrimotion 15 Channel Dual Start (Clutch Activation) Timer $500.00

(1) New Pro Mag 44 Standard Cap and Rotor $25.00

(1) Used Waterman Little Bertha Fuel Pump 19.9 Gallons at 8000 engine rpm with Shut off, Pump Loop, 1 1/4 Inlet, 3/8 Hex Drive $1,000.00

(1) Used Lenco CS3 Ratio's 1.20, 1.22, 1.29 Complete with Clutch Packs and Ring Gear (no case bearing) $750.00 each

(1) Used Hemi Port Line set Rubber 500 Psi line with 90 deg ends, Enderle Long Brass Nozzle bodies, Enderle Port distro block with -8 Port poppit and Carbon -8 Aeroquip feed line $220.00

(1) Used Standard BBC Port Line set. 90 deg ends, Enderle Port Distro block (no Poppit) $150.00

(36) New Ft .250 Virgin Half Round Teflon with (4) 1.312 K-11 Rotor Seals $150.00

(1) New PSI Screw Blower Lower Distribution / Restraint Plate with O-Ring Cord (stock config) for C or D Rotor $250.00

(1) New 4.77 Pro Gear 9 Inch Richmond Ring and Pinion $100.00

(5) Used BAE Stg 5 1.7 Ratio Intake Rocker Arm with 3/8 x 5/16 Adjustors $40.00 Each

(4) Used BAE Stg 5 1.58 Ratio Exhaust Rocker Arm with 3/8 X 5/16 Adjustors $130.00 Each


Pics available for all Parts


Call Jon Salemi at Resolution Racing Services 716-832-7583 or email jon@resolutionracing.com