2010 Mustang TAFC roller for sale $16,500

Discussion in 'Noonan Classifieds' started by Will Hanna, Dec 5, 2019.

  1. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,668
    Likes Received:
    118
    Hate to do it, selling the car I have been building since late 2014. I just don't have time with family and travel schedule covering the races now. This is my baby, so everything is the best I could make it.

    2005 Kevin Knowles chassis (similar to Uyehara in design)

    2010 Mustang body with approximately 30 runs

    Completely redone.

    Work/New parts

    -New Strange Top Loader with 10” 4.29 gear and carbon brakes/calipers.

    -Strange Carbon front brakes

    -Rear end remounted with line up bar, new front and rear motor plates. Car was put on jig, was square on the corners.

    -21.5” Shoulder hoop. New front and middle cage bar with no taper

    -New big boy seat

    -New McAmis 10 gal fuel cell

    -New Moroso custom design oil tank. 16 qt capacity, round design with baffles. Bungs for two heaters. Two vents – one to chassis with one way valve, one air filter vent with internal “U” shape tube to the top. This will allow tank to vent rather than have to fight crank case pressure from chassis or having the one way valve keep the tank from venting.

    -New custom tune up box with two internal levels.

    -Currently configured for Quickdrive with Boninfante converter bellhousing (will work with Lencodrive as well). Can convert back to clutch configuration with hand brake.

    -Has Leahy Safety shutoff and RF system

    -Fresh filled Firefox bottles

    -Convo pros and Hoosier liners/tires (liners are new)

    -Weld magnum polished fronts with new hoosiers

    -Headers to suit non "X" style fat heads

    -Have Spitzer carbon spill plates, wickers in addition to what is currently on the car. Was going to change them.

    -Taylor chutes with spring assist launchers

    -Taylor belts and Taylor engine diaper (for BAE)

    -New 5 star windshield I have not installed and spare burst panel

    -New Dunn & Gone Gen 2 Fuel Altered body (still in Monticello, Ill.). Never mounted or shipped from Dunn.

    -Low run (less than 10) Boninfante Titanium bellhousing for Lencodrive or Quickdrive

    -New tree style wheelie bar and chute anchors.

    $24,500 PRICE REDUCED
    $16,500 Less rear end

    Other parts available:

    Weld and Centerline beadlocks available

    Homebuilt hydraulic jack system. "Semi pro jacks"

    I have a ton of misc parts to suit this car. I just need to inventory them.

    Will Hanna
    will.hanna@insidetopalcohol.com
    979.415.4959 (no calls or texts after 9 p.m.)

    FC1.jpg FC3.jpg FC4.jpg
     
    #1
    Last edited: May 11, 2020
  2. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,668
    Likes Received:
    118
  3. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,668
    Likes Received:
    118

Share This Page