1 1/4 to AN size?

Can someone tell me what the size of 1 1/4 would be to AN fitting size?

HELP!

Sean

 

I believe that would be a -20.

EDB

 

1 1/4 ab

1 1/4 AN will be a - (dash) 20 there are 16 dashes to an inch...

 

an fitting

Man thanks so much!!!!!!!! Is there anywhere I can get a fuel cell fitting that big?????

thanks!

Sean

 

Sean,
I've got a black anodized fitting that came with a Plueger hard line kit that I didn't use, can't remember if it's -20 to -20 or -20 to -16 but it's profiled for directional flow since it was for the oil pickup. Not sure if the threads are long enough for a lock nut, if so I can stick it in when I send the tranny.

 

fitting

I am trying to do is the fuel cell (plastic) I got it has the fuel outlet right in the center. And it hits right at my fuel pump so wont work! So I cut it off and welded the hole shut and was gonna offset the fitting so I could get the dang hose on.
Thanks,
Sean

 

fuel cell bulkhead 1 1/2

Actually what I need now is like a 1 1/2 fuel cell bulkhead. Could anyone make one for me with a nipple to connect the hose? Pump inlet is 1 1/2 not
1 1/4

Thanks!

Sean