Separate names with a comma.
No way. That's all I ever ran . I change mine out every year no matter what. Who's pump? I run a Titan. Has a big suction and makes vaccum . I...
Command module and lahey auto shifter. Every fast promod has it. Dead on shifts. Not 2-300 late like acd
Have a brand new spare Janis cam. 60mm core current promod config. I will only give out specs once money is in my hand. You've seen the speed and...
I'd say you'd have to . All that oil would be up against the cranking not in it. Resistance, cavation.... I'm sure the kick out is only for...
Hell yeah I'd change a gear. Launch higher and split the ratio further if it's shitty down track. Well I have a Lenco so I can get away with that.
What was done to the blower. How big is the opening. What did you spend for updates. Just cuz you paid for updates doesn't mean you got them all....
To the top. Make offers on everything , just sitting on my shelf. Want it gone
Looking for hemi 11in aft clutch. With ti donut if possible. Aluminum will work too. Must be cert with in a few years. Not no old junk please....
What's the line bore look like. I've seen this happens when line bore gets off. If it's right on the. You could open the rear main up .0005 should...
Well if you can find a used m4 or m5 without a crack those sell for around 8-10k A new fowler unit sells for 77 with spacer and I'm pretty sure...
I agree. K-11 aren't out there. Fowler took over kobelco and he build the exact same blower as they didn't 10 years ago and sells for the same...
M5 parts Restraint plate 14.2 tagged 1/15 125 V3 spacer and top insert plate 250 V6 current promod config spacer and insert 750 Discharge...
Are your rocker gear psi fed? If so then yes I've seen people restrict the rocker gear with Allen plugs and drilling a hole of your liking. Me...
I believe there around 42 lbs but that was like a year ago when I shipped them
Didn't have a cabinet. Had to do it on the floor. Bought some giant ass gas nozzle. Like 1.250 !
Well I just finished my ti firewall. It was way harder than I expected. Would I do it again. No. Welding with a air cooled torch was awful. Took...
We use Mgp rods and never had an issue. I've used rnr rods and had good luck when the motor made 2200 hp or so. Over that , well.... I use Mgp now.
How many layers? We used stripper and when we got near last coat of paint used 120 grit on a da to get closer to the carbon. Then used 180 to...
Yes I had a ram 2 disc and make it a 3. 2 disc setup was 4 turns 170 grams. 3 disc was 2-3 turns and 20 grams. I didn't have a problem with it.
Get a oil less unit. I had a husky for 5 years. Would run sander for clutch and grinder for emergencies. Pro jacks blow gun impacts. Never was...
