Separate names with a comma.
The resistance in the wires is transparent to high voltage. I much prefer the MSD. Those Mallory wires may cause a lot of interference if you have...
Thanks Will, I will take that under advisement. I have used those switches for years in aircraft and so far no problems with tire shake closing it...
Fred there are conflicting explanations being posted. Believe me here. This relay is REVERSE to a normall Ford style starter relay. The relay is...
The solenoid works great and having it work like it does also makes our emegency cutoff switch in the back shut the mag off if there is a problem....
Nope, you are not missing a thing. That is exactly how it works.
The only real difference between those two plugs you listed is that the B9ES has a 13/16 hex and the R5671A-9 has a 5/8" hex. The heat ranges are...
Call Tim Smith at LSM and ask him. 916.632.2692. They made an adapter for their unit to fit our Ford Hemi and it works great. try...
PSI Screw blower
A lot on what weight oil is used is dependent on you rod and main oil clearences and how much oil pressure you can maintain.
I would be very interested in your opinions on torquing 4 bolt main caps. Is it best to snug them all down to some lower torque first like 40 ft...
I think what we are talking about is the push to stop pollution so the zinc and phosphate was dropped by some oil companies and was given the SJ...
I assume the is a wet sump....if so....Then the easiest way to figure out the capacity is with the pan off fill it with a measured amount of fluid...
Does it have a built in windage tray?
Throw them over your left shoudler. Recycled aluminum.
Here is a comparison of MSD ignition system power outs: In order: ProMag 44 – 950 milliJoules MSD 10+ - 700 mJ MSD 8 - 315-345 mJ...
What graph do you see it on? Clutch and other RPM sensors occasionally show spikes out of the blue that have nothing to do with voltage.
It also gets rid of voltage spikes.
On the 8973 the ICT is listed sequencially as 1,2,3,4,5,6,7,8. But you firing order maybe 1-3-7-2-6-5-4-8. So you need a cheat sheet when you...
According to the info I have. I will double check with MSD next week just to make sure.
According to the wiring diagrams the 8973 uses the GREEN wire only out of the generator connected to the BRN/WHT input of the 8973 via the CLEAR...