Separate names with a comma.
The 7531 opens the window for traction control and so the new rules will nor permit it.
I had Brodix clean off my sons aluminum SBC when I bought it from them. They did a nice job
We had that done to our BBF block and if I remeber correctly it saved us 16 lbs. Good suggestion. It is easy if you know somebody with a big...
Magnesium will not work. It would not take the pressure of the springs. Magnesesium is not dense enough (maybe not the right term) Although strong...
3400Hp seems a little high to me especially at that RPM.
Ron, I had a 301 in my '57 Chevy back in the early 60'. I went through 3 blocks before I got one that could take the boring and still have good...
That is something to wear out all the blower stripes in one day of racing.
Has he got a catalog or a website?
I just installed a new gear for the forward engagement gear in my reverser and Lenco asked me if I wanted neutral or not because the gear was a...
Our Lenco lever has a guide with notches in it that lock it into FWD, REV or NEUTRAL. The driver pulls up on a ring below the shifter knob to...
One thing that can make the reverser grind after a burnout is that the clutch heated up and expanded and is nor dragging so the shaft through the...
It makes almost no difference as to what side or the other. The only thing that you have to make sure is that the slot in the aluminum cover that...
You would just have to play with how much you are going to pull out. Retard on a blower motor has more effect than non blower motors. I think you...
Unless you use a MSD 7531 or a 8973 to control the mag then the dropped cylinders is totally random. That is one advantage of a digital system...
My recommendation is to first read this article on Blown Alcohol plug reading...
