Separate names with a comma.
Well from what I can see you can rule out losing torque on the rod bolts. They are all still bolted together in place. I have heard of guys using...
Ralph Gorr at http://www.gorrfuelsystems.com/
Get a car where you sit in the middle vice just on one side and it will not make any difference what lane you are in:D
This is like the presidential race:D:D::p
Use it with confidence. It works great:D.
Chuc, what exactly is blocking what part of the tree?
This is going to start a big discussion again. Oh Boy. Ok my advice is to do a search on this forum on 8973 and you will get all the past...
Thanks, Chuck's way of marking the degree wheel every 90* works. I use and old pushrod down the plug hole and I use the firing order. At TDC a few...
Perry, racers have different tricks depending on the type motor;). Is this a hemi, a BBC or what?
Hey Nitro Madness. That peanut butter works for you but in a conversation with Terry Manton some time ago he had concerns on using grease...
Todd, I agree. On our last rebuild for the start of this season we switched to the Manton tool steel tipped pushrods and switched the regular...
You are getting too complicated. It doesn't make any difference if the 12 volts is applied to the blue wire for 1 second, 5 seconds or a minute....
And the purpose of the 12v reset to the 8973 on the line lock is? All you would have to remember is after you start the car just hit the...
Good point and you are not missing anything. It must be that the few degrees that are used in the one Step Retard used as a Run Chip are not as...
I don't understand "pulse". Why do you want to pulse the blue wire?:confused:
You don't have a clutch switch? Yes, you can use the line lock if you are not using the Two Step. If you use the Line Lock the Two Step will...
Forgot to ask. Are you going to use the burnout limiter? Then if so you need a separate switch such as a momentary pushbutton on the steering...
That dark blue wire is what I call the "ready set go" wire. As you have stated. It does several things when 12 volts is applied. The 8973 comes on...
The software and electronics used in the 8973 originate from a tried and proven Digital 7 Ignition system which has been in use outside the blower...
A ProMag doesn't produce much spark when the motor is turned over slowly by the starter. When using start retard the Promag fires the ignition at...
