Separate names with a comma.
One thing is you can't predict how large or how small the backfire will be. There are backfires caused by one cylinder going a little lean and by...
Boy. ain't that the truth, lol
Thanks for the Bob the welder. I do set my idle based on temps then record the leakdown % as a reference so I can always return to the temp if I...
Actually a scavenger blower on a two cycle diesel was on the exhaust side of the motor and scavenged or sucked the exhaust out which in turn draws...
I don't think that is correct because of different shape rotors. I know that a 14-71 SSI B Rotor moves 625 cubic feet in one revolution.
On a standard leakdown tester set at 100 psi then 86% would read 14 psi. If the idle return poppet is capped off and the Barrel Valve outlet hose...
Eli, I guess I don't understand what you are saying there. In the K Type barrel valves I have seen running them at 86% leakdown still does not...
Will didn't write the article on plugs. I did. We tune the plugs to look the same in a 1/8 mile as we do in a 1/4 mile. You have to have two...
I think you are all jumping the gun as to the car being lean. To an ex-nitrous guy who just switched to a blower reading spark plugs with clean...
He is only at 15% OD. If he keeps fuel in it and doesn't advance the timing he might get away with the high compression. We run 12.5 and up to...
So tell me what you are looking at on the plugs to make you think it is lean? Have you read my article at...
Good point Richard. If the springs are going into coil bind it can pop the keepers in the retainer and cause the retainer to break.
Urban legend. Most Ti comes from Russia. We do get some from Canada and some from Georgia. There are other places but they are just small amounts.
I always use BAE Ti retainers and keepers. I don't know who makes them for BAE. I have heard that it is Trick Titanium. They never seem to fail. I...
Yes, they should be grounded.
MSD wants you to ground the heads to each other and then run to the ground on the coil. They suggest you use that small braided copper grounding wire.
The specific gravity is different between water and alcohol so the pressure is different but the GPM on a flow bench is the same. Water will spin...
Fastavenger, are your boxes metal and are they bolted to metal like the firewall? Wizbang is a fiberglass or carbon fiber boat. They have...
Eric is 100% correct. Those heads have to be grounded to each other and to the same ground that the coil is grounded to. If those heads are not...
One of the problems on a boat is that you don't have a steel tublar chassis for a common ground. Where are the junction boxes that the EGTs all...
