Separate names with a comma.
What brand shocks and where are they adjusted to on extension and compression?
You will not be able to pull a 1.81 gear with that power unless the track is real slick. I think you would go into tire shake. You never said what...
What solenoid are you using for the Two Step Leanout and what is the size of the orifice in the solenoid if you know it? What RPM are you going to...
The Time Retard Curve is not designed as a Launch Retard (In the Data Editor and NOT the Launch Retard Curve Graph). I think you would be happier...
As you probably know when you start the car it starts in the Run Retard Curve and the Time Retard Curve is active and when you hit the transbrake...
I have a friend with a dual Turbo car on alcohol that uses Big Stuff EFI. He has a double set of injector nozzles so he can pump enough alcohol....
No problem with a pissing match the statement about the discussion on AFR were because of an earlier discussion and not you. Yes and no and...
The plug is showing the temp inside the chamber based on the AFR. (God, I don't want to get in this discussion again) The AFR for power with...
SoDak,,,,Your PM is too full for me send you a reply to your PM. What the main pill is doesn't tell me if you are richer or leaner. Need GPM...
One of the big differences in a tractor pull run versus a 1/4 run maybe the longer time in running up the RPM range. Do you use a transmission and...
How much heat in your threads on that cylinder? Do you watch the squared off ends of the ground straps for nipping or rounding? Did you show any....
Billy are you using the PAC springs then if so you should use their locators. They are all listed in their catalog at...
No they didn't.
Then with no frost on the top maybe the threads at the end of the plug are exposed more either because the head has been repaired or the plug sits...
Thanks GT. so do you think your plug #8 has heat in the threads like the picture I sent you. It maybe just hard to see in your picture. All the...
I have sent a couple of pictures of heated threads down to Two Threads and down to Four Threads. The big thing is that I don't believe you can put...
Well I don't see what I would call burned threads two down. Tell me again which one you think it is. Also the motor is still running rich. Which...
Again, the heat range of a plug in an alcohol motor has no effect on the thread heat or the burning of the cadium on the flat thread base. It only...
That is not exactly correct. For PAC springs they want you to compute out your actual valve lift (cam lobe lift X Rocker Ratio) plus the...
Those two that are burned to the second thread have to be richen up. When you say "cadium burned off" do you mean that the flat base is dark gray...
