Separate names with a comma.
10", three disc Crower or AFT with large stands.
Good catch. I slipped up and had it backwards. Thanks
There is always a reason Poo Poo happens. It is sometimes just hard or impossible to figure out. Like you said sometimes it is just easier to move on.
Your tires can also wrinkle like that if you are not getting up on the tire fast enough. If you don't have enough wheel then that is what happens....
Dave, I use a Snap-On QT3R250. It has no springs so it stays more accurate longer. I still get it checked but it is always accurate and never has...
I would say that they were not left loose but probably not at the correct torque so you didn't have the correct bolt stretch. This can be caused...
There is no built in safety. The Mag generator just needs to turn fast enough to generate power. If this was the case then it would not start when...
Can't go that way for some reason. Tears up the belt.
There are no problems running a 13.9 pulley with a 14 mm belt. It is done all the time.
This is the way I look at it. Each of the posts on the cap are spaced 45* apart so if you half that you have 22.5* at the mag which is double on...
Frank, the MSD diagram that comes with the 8973 shows the black ground cable end to be at the end that plugs into the 8973 as Charles states. I...
Congratulations to Steve Burck and Tony Garanzuay. Great job.
I thought LA was Lower Alabama.
If no errors showed up and it is wired correctly then it is probably bad. This is not the first one have run across that was received bad. It...
Why wouldn't you leave the ports and hat nozzles where they were and make the main jet or pump sizer smaller? If you made the ports and hat...
I blieve the rule is you can run a 14 mm belt on a 13.9 pulley but not the other way around. We run it that way with no problems.
The question is.... Is that really happening? I understand from several racers that the timing monitor in the data loggers is pretty unstable and...
With a laptop hooked up to the 8973 and the 8973 turned on lool in the upper left quadrant of the computer screen under Monitor and see if there...
Frank. just ignore Will and his rants about the 8973. Everybody can figure them out but Will (lol). The first thing to do is to check the Data...
