Separate names with a comma.
Either one works just great. I am tuning cars with both the Leahy EM Timer and the 8973. A lot depends on the rules because some associations do...
Maybe just a little but not much. Not sure that you would notice it on the coarse EGT scale.
According to the Human Factors Engineers if you sit in the seat and make a circle by touch the tip of your thumb to the tip of the index finger...
You don't need a battery for a ProMag44 unless you run an 8973.
Billy sent me his file and I looked at it and this is what happen. Don't feel bad because you are the second person today that has had this...
Billy, you are going to have to tell us more about the setup. Probably the easiest thing is for you to email me the 8973 setup file so I can look...
With the clutch all zeroed out and set up with the airgap you want then you must have at least .370" between the throwout bearing and the clutch...
I haven't talked to Matt in years. That is good looking dragster. Good luck
Troy the expensive ones are the 6061's. Which plugs depebnds on how much you push the tuneup and car. If you have a good safe tuneup in the car...
No Jetsize still works. You would retune the car a little for a smaller mainjet so you add mopre fuel. This is done by adjusting the Tuning...
How long have the ignition wires been on the car? You are thinking in the right direction because 90% of those type problems are ignition wire...
I set my pump saver poppet using the car's CO2 bottle. I attach the poppet to it and turn up the bottle regulator while watching the gauge on the...
No you don't, You can do it with a leak down tester. You just read the pressure off either gauge because they will both read the same up to the...
I ordered large accurate gauges and an accurate regulator from both MSC and from Graingers and made by own leakdown tester. You would need to buy...
There is an oxidizer in M5 but it is not nitro and yes it is illegal in NHRA. The only additive I know of is PowerMist...
It works great and worth trying. May have to pull out some timing as well as adding more fuel.
BigB, are you just going to use thise leakdown gauge for leaking the cylinders down or are you going to also use it to check and set poppets and...
It has an oxidizer in it and so it requires more fuel. If you can burn more fuel you can make more power. It also makes your eyes burn, makes it...
Actually I believe the direction of the incoming air hitting the rotors is more vertical in a PSI screw blower than in a Rootes blower so it is...
That's a lots of "ifs" and coincidences. Surely if it was that lean that there was no fuel in the hat and it ran without going into detonation...
