Separate names with a comma.
Having oil between the bearing shell and the block is OK. I have read in an article several years ago that the oil between the bearing shell and...
I agree with Altered Boy. The problem could be that there is no where for that oil to go so it comes out around the gasket. It has to go somewhere...
1200 to 1600* is for a gasoline motor on nitrous unless you plan on launching your alcohol motor to the moon. The safe high is 1050*F but I...
Sorry but your post is a little confusing for me. Are you saying you had a skid that broke off the BV then with a broken BV you went up and staged...
SoDak, multiple torque of bolts in steel rods polishes the threads in the rods so that you get a real torque and not a false torque because of a...
Brooks say they have already tighten them and released them and should just use the Brooks recommended torque steps. Thats what I do with the...
Well several things here. The first being why different plug depths? I would guess previous head damage that has resulted in welding up the...
The Ford Hemi is at 350 lbs on the springs. I use motor oil seeing that is works great when going down the track.
On our BBF Boss Hemi if we do not prelube the adjusters at the start of each day we WILL burn an end off a pushrod. I have an oil can with a round...
Paul, I understand what you are saying but then the same applies to Grade marked bolts that are made in those foreign countries. We assume from...
I believe the standard is either ASTM F912 or ASME B18.3 that requires black oxide finish socket head screws to be Grade 8.
It is a standard that black coated socket head bolts are grade 8. Thats according to a very large fastner supply company.
Go up on http://www.hofferflow.com/ The young lady that helped me there was Joanne Pritchard. Have her look up Quote Number 75407 of Jan, 2007....
I tighten barely to finger tight only because you want the bearing to be able to move. I have found it easier to leave the rest of the caps off...
I use grade 8 plated bolts from Ace Hardware with a grade 8 washer and never had a problem. Socket head bolts that a black in color from Ace are...
You have to be careful of the "Flow Meter Range" because that is a little deceiving because when you get real high in the range it is not linear....
Racepak normally uses a -10 Hoffer fuel flow sensor. You can change the output fitting or the BV to a -10 then run at least a 4" straight -10 line...
Depends on the amount of fuel been flowed for the motor due to size of the jet hole. If you have a small motor without much boost and you don't...
Ron C, according to what Terry Manton told me your pushrods should always go back into the same holes with the same lifters and rocker arms. They...
Racers only sell what they don't want anymore either because it is worn out or outdated. Then again there are racers out there that don't know...
