Separate names with a comma.
Cameron, I have never used it but it sounds good especially if it is synthetic and will not burn off and leave a coke deposit on initial startup....
R. F. Carlson Co ask for Rick Lipp 1.800.813.7120 or rickl@rfcarlson.com
Several ring companies sell a a special ring/piston lube that will not coke. Automatic transmission fluid will coke from high temps and stop the...
Did you take those nozzles out of the blower case since the last time out? Are the nozzles in the correct way with the dot up?
Looks like no one will answer so I will chime in here and see if we can get some discussion going. To me the larger hat jets are always put...
Well on a 2800-2900 lb door car 100 lbs equals a tenth of a second or another reference is 20 hp equals a tenth of a second. So roughly 100 lbs is...
The understanding I have from talking to a chemist is that the dust was what they call inert and if it gets in your lungs it is flushed out by...
I am talking about the shoe that closes up the top hole for tuning when lowering the percent OD. They are available to anyone and no trade...
I just put them in and torque them to 30 ft lbs with a dab of motor oil on them. I have seen racers just screw them in hand tight. I like to make...
Casey it would seem to me that you should stick with the 4.30 rear end and use Launch Retard Timing Control to calm it down ioff the line.
It is mike.c@mindspring.com
We used them alot in nitrous also because of the shorter groundstrap. I have never tried them in blown alcohol applications. I would think they...
Try the NGK 5671a-10. It uses a 5/8 hex socket vice the 13/16. I have never had a problems with theM. How are you testing the B10ES to find out...
Thats my email at mike.c@mindspring.com for twenty years now. Maybe I didn't pay my bill (lol). Also try this one mike.canter45@yahoo.com Thanks
Does anyone have a picture of what a Kobelco top opening shoe looks like that they can email me at mike.c@mindspring.com. Really looking for one...
I would say that quivering is probaly what we obeserve on the track as basketballing. This is when the car just can't get up on the tires but...
There are fully sealed bearings that will take high temps. call these guys and tell them what you are looking for http://www.bearingplace.com/...
Maybe dragster tires/wheels can't take the downforce. Promod front tires and wheels may be a consideration to reduce weight. They are a lot...
I like to keep it 150 and above. Maybe 150-175 at 8000 rpm for good fuel atomization.