Separate names with a comma.
When does your motor run 180 psi fuel pressure? Do you have a data logger? That is real high pressure. What is your pump saver poppet crack...
Two speed Lenco starting off in second gear?:cool:
Nope, it is not slew rate.
My understanding is that the retard is occuring through the entire RPM range as soon as the mag is put under load. Here is a explanation of why it...
A Mallory mag retards about 4* on timing at RPM and a 44 remains constant. So if you had 40* on a Mallory would be 36* on a 44. (Theoretically, lol)
Well not so fast. One only changes rod lengths in the specific cylinders for a specific reason. Don't just start randomly changing rod lengths to...
With Ford semi-hemi dogbone chamber heads or Ford (Carrol Carter) real hemi heads?
Would not the Lenco be harder to turn with the a clutch pack left engaged because of the gear ratio is changed so more effort required.
A three speed Lenco only has two clutch packs and the first is locked out the first time you shift. A TH400 is actually spinning some main...
If you can't apply all the power a motor makes or is capable of making then it doesn't matter if it is a wedge or a hemi. You can't compare the...
That model is tested and is linear from 1.74 to 16.129 GPM on methanol.
And my answer to your direct question on if they flow the same then way not the same power is that flow is only what is happening up to the valve...
Let me add this. Comparing cars and motors that run only in ADRL is a hard thing to do because of the no rules. There are expensive traction...
Well that is a major problem. Why should a racer put out a lot of money for a motor that is going to be hard to make competative. We all go to the...
Does it have a part number on it. The one I have sitting here on my desk has Hoffer Flow written on it plus the part number 1.75-16-CB-1M-MS-X
Gosh let me see........Manzo maybe. There will always be guys that can make and engine perform but how many Walt Austins do you see running at a...
The flowmeters used by Racepak are made by Hoffer and are stainless steel and ceramic. They will work with nitro. Most methanol sized flowmeter...
Overkill, I am not sure that I agree with some of your observations on wedges and hemis. The monkey see monkey do is totally wrong. Not all those...
Well I was writing my replay based on the fact that you said it was a blown alcohol combo in your original post. While I was writing it you posted...
EGTs temps are dependent on ignition timing and fuel mixture. If you are way retarded the flame moves into the header and the EGTs go up. The...
