Separate names with a comma.
Normally those Waterman pump modifications are mainly done to reduce cavitations if you take the motor up to high rpms. What you are seeing with...
Try Tom Conway. I heard that he make the device
One should first ask why anybody would call a High Speed a High Speed. We don't turn it on at high MPH or high RPM. All it is is an extension of...
No it doesn't make any difference where the main jet is located BUT why would you move it. First the main jet circuit is actually a combination of...
What have you just done or changed on this motor? Could you time it before you did it? Is the degree wheel hub on correctly?
If it is just upsetting you on the Racepak or other data logger then right click on the appropriate box for the pressure above the graph and move...
I believe what you are seeing is normal gear tooth pressure pulses but if you want to print screen from your computer displaying it from the data...
No that is not normal to bounce all over the place. If you put the pressure sensor on the pump side of the BV then you will see what appears to be...
One reason would be if you had a valve train failure that shut off a single cylinder. If this happens the the boost to the remaining cylinders...
Doesn't make any difference where the idle poppet is located. Some move it down on the return line for safety. You come off the BV on the idle...
RB, your apology is accepted and thank you.
Well I am backing out of this discussion because you ask me a question and I give you an answer and you tell me I am wrong. I don't believe you...
Tony if you put a nitrous jet before the solenoid you would need eight solenoids (which has been done). That is not the same thing.
The answer still to your original question is that the orifice changes the flow and not the pressure in a poppet. You can have an increase in...
If it is not yet flowing then there can be no pressure drop. To carry the subject a little further. If you have a 150 psi of fuel pressure on the...
No, the size of the high speed jet does NOT affect the opening pressure of the poppet. You can set it with or without the jet in place. A closed...
I agree with Craig. The air is pushed back on the top of the rotors then down the ouside of the rotors then forward where it is combined to go out...
It is fairly common to use a 14mm belt on a 13.9mm pulley. You just can't use a 13.9mm belt on a 14mm pulley. it is to do with the shape of the...
Chuck Ford's blower out of Alabama.
Well I have seen both a M5 and a CFH perform and the M5 produces more boost at the same OD. I know what the temps are of the air charge on the M5...
