Separate names with a comma.
If you are buying a used Kobelco then you need to know what rotors are in it such as K-8, K-9 or K-11. There was a problem with some of the K-8s...
I called Venolia today and had a long talk with them and the are making what used to be the Brooks rods. They are making only the B2 rod which...
Well you would have to ask why it is optional. Probably means in some applications of the barrel valve the pump is different or the pressure is...
When you say part throttle are you talking about what I said in my post that was an answer to OzAlky's post on setting his pump saver poppet at...
The reason it doesn't effect the idle and overall running when it leaks pass the spool is the Pump Saver Poppet is blocking it. Yes, there is...
Welcome to the Dark Side (lol). Are you using Ti or stainless steel exhaust valves. have you pulled the heads yet to see if the valves kissed the...
You have to be careful on setting the Pump Saver Poppet because the fuel pressure increases as you change the tuneup to compensate for lower...
Well, I have heard this many times before that the pump saver will not dump if the throttle is wide open. I say that is wrong. There is no oring...
All magnetos have an inherent characteristic of retarding timing as the ignition load on the magneto increases. This retarding of the ignition is...
When you get a chance (and if you want to) now that it is running switch back to the old box and see what happens. Maybe it was just a loose or...
It just sounds scary and looks bad with all the unburned gases shooting out. Don't get me wrong because I have never had a problem with a car on a...
If it is an "analog limiter" which uses a chip then it is really harsh sounding and there is no method to their madness on which cylinder does not...
I think the limit would be based on the total compression which is your static compression, and your blower boost plus the cam. The limit would be...
I believe that MSD is not making their MSD 10+ anymore which is a shame. They do still make the MSD 8 which puts out 345 MilliJoules which is more...
One thing nobody has brought up is the Magneto Effect on timing. On a standard NON MSD mag especially with points the timing is going to retard...
The temps were in the 30's and the oil was too thick plus he had a fresh 14-71 on the motor so it turned over too slow. Again, with the plugs out...
It is easy....it is 150 lb springs.
That is how we did it but used the CAT 24 v solenoid. Like said that small jumper on the starter is important. I will own up and tell a true...
We ended up buying a 24 v charger but our batteries are really hidden away in the trunk and are hard to get to. I bought a high amperage switch...
Casey, I don't remember the part number for that CAT solenoid but if you talk to the CAT parts counter guy he can probably have it.
