Separate names with a comma.
Yea, everybody was talking about FC records and all forgot about the PMs. I need to keep the FC guys straight :rolleyes:(lol) because the...
As far as I can tell it does have the time based curve. I tried to download the software and dig more into it but no joy yet. It is available to...
Hpwasher, sorry but you asked so I will tell you are mistaken. The screw blowers in promods work just great and there is no way a Roots car can...
Brandon, we will need more than a picture and a $1200 price on the Electrimotion website to do a comparison. Can you even buy the "Command Module"...
New MSD 7730 Power Grid Controller. It appears that MSD has evolved the 8973 one step further into the 7730 Controller. The 7730 can be...
Since we are talking about Roots superchargers it appears that a lot of 1/8 mile tracks here in the South and the South East have races where...
When PSI first came out with their Roots blowers there was not an M4 or M4 out there and the PSI was fairly good because it kept the outlet air...
The air coming out of the pie hole on a high helix blower comes out at a very sharp angle of 30-45* towards the front of the motor then the air...
It is as is the MSD trigger. The problem arises on either if you put an extension crank trigger cable from the sensor to the 8973 or the Electric...
If you ran a crank trigger with the Promag and had timers and the Six Shooter then an unshielded crank trigger cable can cause random firing...
To be fair Will, the problem has not really been the actual 8973, or the 7AL2, 7AL3 or the Digital 7 but has been the problem of the unshielded...
Wayne, I believe the scheme is pretty standard and that two pin connector with the black and green wire usually is hooked to the throttle switch...
Texas Racer, all race cars with a high output magneto systems especially a ProMag 44 radiate what is called Electromagnetic Interference or what...
Don, an M5 is $13000, and a M4 is $8000. The M5 is very cheap compared to a Chuck Ford or a Troy Critchley blower. Depending on what options those...
I am still trying to figure how to make 5000 hp on our motor by the book :cool:.
Graham, you really should work out the IC. If you do then adjust it to around 48-49" out about 6-7" up and then work from there. I believe you are...
Graham, that is real hard to say on the bars. Do you know where the IC is. Keeping the bottom bars level with the ground and dropping the front of...
Wildcatracing.....do you have any launch retard control? What tires are you using at what pressure? What rear shocks are on the car and are they...
There are two major trigger sensors available that both work great made by MSD and Leahy (http://www.electrimotion.com/). MSD's comes with the...
This is what I got from Darren Mayer at DMPE some time ago. The rotors failures are not specific to the profile name (K8. K9, or K11) but more...
