Separate names with a comma.
33 to 38% in the hat nozzles and 62-66% in the port nozzles.
Brooks are now made by Venolia and instead of being B2 rods they are V2 rods. You would have to call them and find out what is Off the Shelf same...
Kendrick, I have always set them at .012" and that is what a great tuner always told me to set them at. I believe .004 to .006" would be way to...
Are you using silicone sealer between the hat and the blower? The norm for the butterflies is .012" on the tightess one.
So did they balance the rotors? The way the rotors rotate the case would be messed up if trash went in the top beacuse the rotor both rotate outwards.
No way would I buy a blower that has had the rotors welded. So what happened to require welding? Is this a Kobelco K-8 or K-9. If the rotors...
What that is assuming is that your butterflies are set at a point that is too far closed so they are moving in and out based on suction caused by...
To me checking the gears and timing is part of pulling the rotors to fix the blacks and stripes. Hmmmm sounds like it would be cheaper to send it...
Define what you mean by "service" your blower. If the inside of the case is not screwed up and the rotors are not too beat up then all you need is...
I understand what you are trying to get rid of. This is the way I understand what is happening. If I am wrong then somebody jump in here. The...
Kendrick, a couple of things to try. First is to drop your idle bypass down to 8 psi crack pressure and try it. The other thing is as TADHemiracer...
What is your idle return poppet set at?
I don't think it is the mag's internal pickups floating around that causes the instability they a rock solid. I believe it is all the slack in...
From the middle of the rear blower stud to the tip of the small bolts that hold the small caps on the back is exactly 10".
Are you talking about the back blower stud hole to the furthest back of anything on the blower? Do you want it from the middle of the blower stud...
Remember you need enough room to fit a bag also.
The length of the snout on the blower is going to be the main factor here. Yes you can put them on without too much setback as long as the front...
I have my CSR but I see a lot of guys use this one....
In case some of you Brooks B2 lovers didn't hear. Venolia has a bunch of guys working there that came over from Brooks and they are making an...
I have been known to superglue them in the slot. Just a small dab top and bottom down in the slot to keep them from falling out. Then I put the...
