Separate names with a comma.
Sorry Kurt but all high powered fast 4-Link cars like a blown promod are going to need some correction/preload in the rear suspension. I don't...
Normally it is from 1/8 to 1/4.
Or want to go quicker;).
The thought is by putting preload by adjusting the upper right bar in a 4-Link that you actually put the suspension in a bind. By setting the...
Do you have enough movement in the rear mounting that you can put in a little rear steer? If you have movement then try about an 1/8" at a time...
Will, what is the inside diameter of an A-3 hose? Is it 3/16"?
I believe this is a solid rear suspension in a funny car and no 4-link.
Wow, 6.5 psi and above is a lot of tire pressure for a 2600 lb car with that size tire. Try dropping them down to 5.75 psi and see if it still...
Yes I do but that is a guess because I have never tried it but like I said I bet somebody has. If it worked you can't keep secrets long
Can't visualize that with a standard twist rotor because it is not pulling as much air to the front on the bottom like a high helix does. Remember...
When does your car pull to the right? At launch or down track? Have you swapped the slicks from one side to another and tried it? We use about one...
Don't know the answer to that but it it helped it would have already been down by the top fuel guys.
The problem is that you can make that blue line appear from advancing the ignition or from leaning out the mixture. Since your plug coloring comes...
Joe, I talked about timing in my article. We normally know what timing to use in most blown engines so it is easier to go with the set guidlines...
Yes it takes more power to make power and at some point you are not going anywhere faster. When the VE% drops then the fuel requirement also...
This is to answer Sune's question on Standard Roots blower performance. First let me say that anything that I know on screw and Roots blowers...
Sean so do you have any ideas as to what ET you need to run to be competitive? As far as 2650 lb PMs at 14.5% and 20% OD you can look at the ETs...
It better read wide open like that. Measure from the plug wire connecting contact to the center electrode.
Where can you buy a $15K handbuilt Roots blower from? LOL
Are there weight differences between the screw and Roots cars in this association? A great Rootes blower these days that is competitive from Mike...
