Separate names with a comma.
Well there is a head out there that is great but is not available so there is no point in telling you about it and getting you all worked up. I...
I know what all the top performers in NHRA legal Promod ran in 2013 using the 14.5% OD and the NRE X-1 heads are the top performer. The fastest...
Noonan Race Engineering (NRE) X1 heeds are number one http://www.noonanraceengineering.com.au/products_featured.php?g_ProductID=57
Andy what is the max recommended blower rpm for the LB-21?
I would stick with no more than 26*
The amount of ignition timing is dependent of flame front travel which consists of sparkplug location and design of combustion chamber which...
No difference
You need to find out what the rotor RPM limitations on these blowers if you are going to run 32% OD and want to go higher and what you max engine...
Changing the timing does not change the AFR. There is only one correct AFR. Changing the timing does change the temperature inside the combustion...
Forgive me but I am confused. When you say .005" per tooth change what pulley and what if you change both pulleys to go up a small percentage...
Bruce, did you get the PM? Bob, thanks for the data on Joe Adkins. I called him and he helped me a lot.
Please put a hold on that it sounds great. Is it an aluminum bottle or a carbon fiber bottle? Does it include a the ball valve? I got to talk to...
Who makes the driver fresh air systems with that spun fiber bottle. I found one from Chi-Town for $800 which included the regulator, ball valve...
If the hat is all apart and you are going to clean and assemble it with anti-seize compound on all the pins then no problem. If the hat is...
Even if your car doesn't have a crank trigger you can still connect the tester's crank trigger output to the system and make it believe the engine...
Why not? I use mine to trigger the 8973 or the Grid by using the crank trigger input. I can change RPM up and down and that is what I need to...
I have a 8998 and have used it on a 8973. It really doesn't know the difference if you are emulating a crank trigger input.
My information on the 8973 start retard not working comes from MSD's Joe Pando. When it didn't work for me I called him and discussed ig with him....
No risk as far as I have ever been told. On a blown motor the idea is to get as much exhaust out as fast as possible and clear the body or what...
According to the back room guys at MSD they stopped making the 8993 several years ago due to the lack of sales.
