Separate names with a comma.
Can you explain the statement that you said in your original post about leaving the main jet the same as last year in the heat. You mean you made...
If you go with 5.0 gear then you are going to turn high 9000's and into the 10,000's. I think you would do good running a 4.56 with your first...
Since you are just starting out I would recommend no more than 25 degrees until you get comfortable with the tuneup. As far as shift rpm it...
Check your PMs
Ron, the answer to your question is no. The temperature of the ground strap is controlled by the length of the ground strap. So if you were using...
Nope, it will not stop the strap from being nipped. You either need less ignition advance or more fuel.
No, not with a blown alcohol motor. It does apply to nitrous motors. The temperature difference of the center electrode doesn't make any...
Changing from a -9 to a -10 of even a -11 makes no difference to reading a sparkplug or the tuneup on a blown alcohol motor since we don't read...
Yes that would be good.
Got to know what rear gear is used. If it is a 4.30 or 4.56 rear gear then I think 2450 DS rpm at .249 seconds is way fast.
Have you got a data recorder on the car? What rear gear and first gear are you running with a 33" tire. Not sure I would mess with the four link...
Let me expand a little on what Jody is hinting to. DS rpm is the big clue to what is happening and what is the cause of tire shake. There are in...
Then being that motor it needs to go on top on the back behind the intake manifold.
Call Shannon Davis at 828-645-1505
The pump pressure is not as important as the pressure reading on top of the back of the block which is normally the feed down to the main and rod...
The Orange and Yellow wire is the one you want. It gives you ground when energized. Use a Bosch type black cube 30 amp relay and you will be good...
I would highly recommend the super strong made by Lenco Racing. They don't seem to break as much.
1. Trick Titanium 8 5/8” can, SFI 6.3 for Promods. Will fit Chrysler Hemi and Chevy blocks. Starter pocket on driver’s side. Has updated...
Welcome to the forum. That is perfectly alright to put even amounts of weight on every other finger. We all do it. It makes it easier to adjust...
You need to verify the the mesh is correct between the starter pinion gear and the starter ring. Use a straightened medium size paper clip as a...
