Separate names with a comma.
Yes, 25 runs would be ok in those conditions.
Rcparker, running a screw blower and ET of 3.72 is really pushing the limit with 25 runs on a set of rods. So far you have had no problems and...
Again contact Darren Meyer at DMPE
Call Darren Meyer at DMPE. He made them all when he worked for Kobelco. The best thing is to get the serial number of the blower and call him....
You can find one that fits your requirements here I believe we use the 2317....
Yes a 24 volt starter is needed. You can use lightweight Braile 12 volt batteries in series. If you don't use a Méziere, CSR or DMPE flexplate you...
By what the OP said it is only pulling the motor down by 200 rpm. That is not much. I need the rest of the data on the car before any real...
Why is that? Took it from launch to top of first gear on both types of cars.
FC is 1508 rpm per second from launch to the shift point in first gear. PM is 2000 rpm per second from launch to the shift point in first gear
Your DS rpm at .25 sec has to be wrong. Check it again. You also need more finger weight to lock that clutch up at the end of the run. What kind...
If the clutch is slipping the DS and clutch will separate from the engine together. What you have indicates you need more clutch. This will...
Two things I know of can do that. First is to set the crank trigger timing the wrong side of TDC. Been there and done that. You will get lots of...
Jonnie just confirmed that he is at 92% OD and 100% NHRA legal. Again congratulations
Congratulations to Adam Flamholc and the entire crew for winning the Swedish International TMFC (TAFC) class at Tierp Arena. Adam run a personal...
Adam, just beat Jonnie in the semi finals with a personal best of a 5.54 sec at 264. Wow. I wish I had been there. Don't know yet what happened to...
