Separate names with a comma.
Rods They seem to be fine . It's like alum. rods change after 10- 15 runs Depending on Many factors. Or whatever your maintenance is. But...
A-Fuel Parts Sell your stuff + hook up with Nitro link or Larry Miersh. He is selling A-Fuel stuff. Run Big Bore short stroke stuff. !/2 short or...
batttery's What make and size are you referring to ? 12 or 16 volts ? Don
measurements That goes for the rods are referred to. Call them what they are. Center to center length. My rod boxes have c to c on the side. not...
Rpm I am using fatheads, and all my A-Fuel parts in my Top dragster, Kebelco shift @ 8000. Pistons are 814 gms. pins are 328 gms with fuel rods...
rear distance Just fab some new plates and move the rear back some. Not a problem. Call spitzer. Don
shake Whats up with the 4900 lock up? I sure wouldn't worry about tires. I run almost the same with a Kebelco @ 32 over. And 452 cu in At a...
measurements Is that 1/2 short deck or std deck? Don
tail shat Never broke a shorty. Input shafts yes. Unless you have the extra money you don't need, run what you have. Don
nitro If I were you, I would look up the closest VP dealer near you, and give them a call. Don
sleeves Thank you for the help!!! Don
ok guy's who knows? How large a bore can we go with ? sleeves are 4.70 straight od. Thanks Don
intake When I ran the 14 degree stuff, I got a Mag intake from Indy. It was awsun. Jetting was really easy, and made tons of power. Ran 5,80's in...
sleve puller Thanks Robert for the call and service Don.
It's time to buy a sleeve puller. Want a good one. Don't want to fight with the tool to get it to work, or fall apart during use. Thanks Don
starter barrery Yes I have a friend that uses that battery in a blown alky deal and it starts every time for 2 years now. I always likes the CSI...
starter/battery What chassis is it going in? It is not that hard what you are trying to do. Just buy a GOOD starter and a good battery. The...
starter location I went through this last year. I used Mezerie starter and flywheel. They are not cheap, but there billet flywheels are a piece...
Thanks for all your help. Got some on the way. Don
injection When you set it up, if you don't want the port nozzels just flip the -8 check valve around. The fuel won't flow through the check...
