Separate names with a comma.
Are you talking about just getting flow calibrated Enderle main jets and port jets? If so then Ralph Gorr at Gorr Fuel Systems. A lot of racers...
NGK R5671A-10 works great and is easy to read and is reasonably priced. If you are really going to push the envelope and want the absolute best...
Are you guys using zero gap rings?
Don, the Autolite's with the short ground strap are great for nitrous and should be great for nitro but the cadium will not burn off to be able to...
Let me add a couple of things, talked with Bruno about all and he says the only way that bushing can be pushed forward is if the run out of the...
Lol, you can't argue with success. If something is working then you don't change. Also GRP rods are not forged but cut out of a "sheet" of aluminum.
Yes, thanks for the pictures. I can tell you that I have never seen this with GRP rods and Proxtreme guys push their motors pretty hard....
Can somebody give more explanation to the original post's statement on a "Growing Trend". I have never seen it or heard of the problem. I don't...
Not sure you will see as much ET gain as you will MPH gain. Most cars with screw blowers running 1/8th mile have to pull out so much timing on...
Didn't change the cam, valves or heads or anything under the blower. The airfoil is increasing the air going into the blower so therefore more boost
I can't see what in the Bruno would push the bushing forward. It has to be caused by the converter pump shaft. How does converter pump shaft...
I have seen one pound of boost from a Cantrell airfoil I would expect you should get around the same. If i. Might suggest adding .5 gpm of fuel...
Do you know who made the airfoil and what hat it was made for. Most of the airfoils I have seen were made for the short PSI style hat and will not...
Thanks Will, maybe I need to try it but I am really consistent with Jetsize. My plugs are always where I want them but always willing to try...
Gary, I just found out about this one from a friend a couple of weeks ago. I have not used it so I can't recommend it but you can download a demo...
X2 on that. Never had a problem with the MSD unit.
price reduced to $1200 plus shipping from fort myers florida
Lots of info missing. Is this a screw blower or roots blower. Converter or clutch. What RPM at idle? What spring pressure is your idle return...
That is correct. With everything else going on you need it to record automatically.
