Separate names with a comma.
Let me ask this. You say that it will start but then stops. If you keep squirting alcohol in with the squirt bottle can you keep it running. Have...
That's a big difference in the stator of the converter switching from a Roots to a screw. The big thing in buying a used converter is having the...
Moe, do you know what pump and stator specs are in the converter? Sounds like s good combination. NZPromod do you run a Roots or screw blower?
Nigel the Bruno bell housing here in the States will not meet SFI standards for blown application and I wouldn't recommend anyone using it on a...
The small top high helix came out to up the velocity of the incoming air when NHRA forced the Promods to reduce their overdrive because the...
Got your email and sent you a picture
Rethought that and I believe you are correct. The lift would be the same.
That's a good explanation. Just one thing to add is that the lift will increase by the difference in diameter between the two wheels.
Yes, but you have to use the straight out fitting to run to the flow meter then out of the flow meter to a Y fitting to send fuel to the hat and...
As Mark says after the barrel valve. The norm to avoid turbelance and make the flow readings more accurate is to have four inches of -10 hose...
I bought it used for $1000 and it was in great shape. If I bought it new then the only option would have been the pager and the electronics unit...
Bought an Altalab with a pager. Works great. What is good is that it all fits into a plastic briefcase so I can carry with me on the plane. It is...
Those cracks in the DMPE where in the early models and doesn't happen anymore. Before you buy a used M4 or M5 call DMPE and find out which version...
Depends on the class and association you are racing with and the overdrive you are allowed. The Kobelco Superman is designed for the lower OD...
That amount of change in weather and your car's performance indicates that you need a transmission gear change. Yes. RIP Dr Bill Barrett
So with a 500ft DA did your wheel speed go too high and put you in a high speed shake?
There is a epoxy that is not attacked by alcohol that is used to reshape intake ports. It is a titanium epoxy and I have never heard of it coming...
Timo, just checking to make sure that you know that if you use a .903 lifter cam grind with a 1.00 lifter that the cam specifications will change...
Yes, with that tach converter you will never read true two step rpm on the tach. The two step is actually shutting off the mag to keep cylinders...
We only use a stainless steel mesh cone the goes into the inlet line on the barrel valve and is held in place by the attached hose's AN fitting....
