Separate names with a comma.
It doesn't make any difference where the joint is. You can join the two ends together with superglue. I little dap of silicone sealer doesn't...
You might want to send it to Ralph Gorr at http://gorrfuelsystems.com/ It would be pretty unusual for a Waterman Lil Bertha pump to have suddenly...
The 8973 has two rpm function switches that can supply a ground to a shift light. You have the actual shift light function and you have an rpm...
Are you using a digital mag controller like a MSD Grid 7730 or a 8973?
Are you talking about a Racepak V300? If so then the question would be why? Or do you mean a MSD Grid 7730 or something else?
To add to what Mike said it is KD Tools part number 2012
Call Andy at PSI.
NRE makes a great one.
That should be enough ground for the crank trigger because you are just ground the shield and not creating a return path to the coil as with the...
But does the crank trigger shield ground go to ground right now?
From what I have seen the most common reason for having ingested a foreign object is the nuts or bolts that attach the injector hat to the top plate.
The RCD P&P pump works well for a lot of us and so does the System One pump. Either of them will do just great.
They don't need much fuel but sounds like a bearing failure. The PSI screw blowers have to have the bearings packed with grease every so often.
Simple answer is YES to all you listed. You are just going to have to take it apart and check everything.
The IGNITION IN is from whatever source you have trigger the ProMag and will remain consistent only if the RPM is constant. As you increase in...
Something is acting as an antenna. Since it has happened on both the 8973 and the 7730 is even more indication. The problem can bve even though it...
The recorded Ignition In is the ignition trigger signal coming from either the crank trigger or from the lower wire on the generator which is the...
When you were having the issues before you disconnected everything did you look at the data recorded within the Grid on MSDReView? Especial...
That is true.
Talking about Mallory Supermags. MSD ProMags have a timing compensation circuit in the Points Box to make the timing not change when the mag is...
