Separate names with a comma.
wires I am not bad mouthing anything, but years ago I put a set of Moroso Blue wires on my injected alky dragster. On the 3 week we ran it @...
ends if you don' t have any luck with them, there are lots of places. I don't know if you need to buy quantity or not. I even may have some in...
leanouts Generally speaking, you like to put fuel back in at the shift to help settle the car down then take it away again. They use NO + NC...
rods mine are 90 lbs.
lines Not that I know of. I run rubber lines because it is easier for me during maintenance, + it is less likely to break if it shakes. Plus I...
intake Fat heads or fuel, Brad, Dart, Veney, AJ? How many bolts if they are fuel heads? Don
hose Do you need 8 ft. I have some goodyear nhra cert. hose but I don,t know if there is 8 ft. left in the trailer? If not you can get some from...
bearings It is good to mike the big end + the bearing, so you know the dimensions, but the pin in the cap will hold the bearing. the rod changes...
rust please enplane more than just gibbs. Thanks Don
six shooter Those switches are NO or NC. just double check it to make sure you have it right. There is a ground , a power in, and power out....
parts I got mine years ago right from MSD. Just call. Or go to a National event, and have them do it. But they need to know so they can put the...
six shooter Since you didn't say what the timing is, Are you trying to pull more time out of the thing than you have static timing in the motor?...
LENCO b+j What WOULD YOU SAY THE WEIGHT DIFFERENCE IS BETWEEN THE TWO? Thanks Don
Brooks Jerry, I know you hate to reply on this, but call me,or PM me. need to start thinking of next year. Thanks Don Onimus or J+D Motorsports
starting If the weather is warm, or above say 60 degrees Use alky. Did you make sure the motor was backed down really good before you took it to...
tire size What is the 4500 RPM's for? I think the back of an old NHRA rule book has that equation.or just try + Google it. should fine...
rods R+R call them. is there a problem with Brooks?I have been using the B-2 for a long time. Haven't talked to Jerry in a little while. But if...
I really haven't seen any., but the motor sounds happier with the VP. But then again I run the M-5 most of the time. But if I had a choice I would...
clearance compression depends on dome hgt. vale relief , + flat on top. Just remember the flat! Closed up spark plugs on a run + thought I had...
gauge I agree with Mike as usual !!!If you checked the gauge + you feel comfortable about it ,that is good boost. I assume it is not a pro mod....
