Separate names with a comma.
I wouldn't call that a AFR compution. That's just a number that happens to fall within the same approximate numbers as AFR. Ok to use it, call it...
Will, that all depends on how you are computing AFR. There are some fairly accurate ways of doing it and some inaccurate ways of doing it.
Thanks Norm
Use R&R rods with upgraded bolts. 18 runs
I think RBS sells a great one http://www.rbssuperchargers.com/Products/Blower_Manifold_Lapping_Plate--2700%2D0040
Let me add to being the tuner that it is also your maintence program.
Not sure I would ever say a hemi is weak unless you get aggressive. Look at our motor it is not what I call aggressive, in fact, it has a real...
Because of the tuner!
Stay with those AFR numbers and you will be good.
Bob, just to make sure everyone understands this that if you run a blown alcohol car at an AFR of 6.45:1 you will probably have to go and pick up...
A book that goes well with that book is by Ken Lowe and gets more into the mechanics of how to set up a mechanical fuel injection system...
You need a -10 to -8 Y-block. You run a -10 out of the BV for about 4 or 5 inches as straight as you can get it to avoid turbulence. Attach the...
That is pretty well what I would flow
A biggest percent of ET is traction off the line to 330 ft. Increasing power to the track is the fastest way to improve ET. So how boost are you...
You still have the problem of the faster you turn a roots blower the more it heats the incoming air charge and the more horsepower it takes to...
Nope, it is 14,625 rpm
I am a little confused. There is no way an 81 pill can provide the correct AFR from 1400 ft to 4000 ft. That is absolutely impossible. On an...
You must have an error because with an AFR of 6.2 the motor would have destroyed itself. Anything above a 4.2 AFR is prone to detonation
The Volumetric Efficiency of a High Helix roots type supercharger drops off sharply at 14,625 rpm. So if your engine high Point was 10,000 rpm you...
Call Andy Wilfong at Littlefield Blowers (714) 992-9292 and ask him. He is a ITA member and is a expert on blowers
