Separate names with a comma.
Call Jon Kyle at apd. He did a ton of work with brodix heads and block. Alot of rnd work was his doing.
I this a hemi or Chevy. My Chevy had a 4 stage autoverde pump and it was better than any moroso had out. If itls a hemi Janis runs one on his...
Janis ran the welded bars in that skinny kid built stratus. He fought same thing. I was evil when he peddled it. You never knew which way it was...
Bruce at a .250? Mine has 1700-2000 @ .250 .500 between 2800-3200 1.0 is between 3700-4200 depending on track now Cayuga and grand bend are on...
This has been happening for far to long to good people of this site. To let people like this idiot in Ohio take advantage of us is getting out of...
I have used Home Depot 40 gallon? I believe with 120 psi air in the lines works great. Never a problem. Inthink the tiny pancake compressors might...
Any type of automotive panel bonder works great. 3m 8115 I've used before or lord fuser all good stuff
Yep we did and helped a bunch. Also look into LS firing order
Get the front mount offset drive from Rcd. I had it on both my hemi and Chevy. You could run mag only with very little movement like 1 degree or...
Don't know if this is even possible but can you rent a toter home ? Need to rent one for the week of sept 19. Going from Michigan to MIR. Anybody...
If your trying to save weight why don't you just buy the xrp lines and crimp fittings. Amazing how lite they are
I've ran gt performance profiler solid heads. Great power and consistancy with good valve locations. We made 2375hp at 20 on 525 Chevy. With a m5
No zip ties. Use a small piece of aluminum c channel so it fits around the sliding part of the cable and use a small clevis pin like for an rc car...
We need more info on setup. What size is the blower , motor , fuel system?'
Gaskets Also if your having sealing issues take a hard block , start with 120 and block over the gasket surface to get all the high spots out...
Is the crank made yet. Make it with hemi rod bearings and run clevite v bearings it will last forever ran it for 7 years 6.09@235
Goggle it. There is a tread on here that talks all about it. Not very positive results.
Hey what's the best starter for a hemi 24 volt deal ? I have a tilton super starter and just seems slow. New batteries , cables , everything. 24...
Pac 1360. Can't go wrong. Last forever at that rpm. My Chevy had 950 lift and those springs would go 50+ runs never losing psi.
I read mine on the psi of the oil pump going into the motor . Or i have tapped into the system one oil filter and put it there. Haven't noticed a...
