Separate names with a comma.
I agree with Jody. We use nothing but ARP converter bolts and never have a problem. We use CSR flex plate
It probably would work but $2700 for a cooler is a little much. I use a Synder Motorsports unit which works just great and is one heck of a lot...
Boost changes with rpm and believe it or not the gallons per pound of boost will remain fairly constant providing you are not turning leanouts on...
It would say it is a RAM finger
I have pictures looking into the hat with vertical bars during WOT and you can see the fuel being sprayed as a fog. I think both Mike Janis' and...
You don't need all those supports if you use two vertical bars like in the Janis hat
As said you have to retune it to get the extra power. Cooling the incoming air is the same as lowering the DA and you need more fuel. If you can...
I believe the main purpose of the spray bar is to cool in the incoming air, atomization is secondary. Mike Janis of Jan-Cen Motorsports can...
The only one that needs to be plugged in is the violet and green wire plug and power to the box. There is no reason why you should have a low...
Joe, there should be no reason that the tester would do that on a Grid. The only thing the tester supplies is a simulated crank trigger signal and...
anytime you start the car at the line or in the pits the golf cart has to be there and plugged in. Then people want to use the golf cart and they...
My opinion is that the fuel lines should be crimped or swedged and pressure tested. I like the lightweight black hose from XRP. They have two...
Joe, email me at mike.c@mindspring.com
Joe, have you updated the Grid software yet? Are you using the right click button to "add dot"
The reason a roots blower car uses 24 volts is because with a 12 volt starter it will not spin over fast enough with a crank trigger to start. The...
SOLD
For sale , Bruno Converter Drive with Boninfante (Jeff Bohr Racing) aluminum can has been SOLD
Can you send it back to New Century. I know with BAE repairing blocked they then put it back into the CNC and regrind the weld off so the block...
I use methanol in a squirt bottle if the temps are above 62 degrees. If below 62 degrees I add one third gas to the squirt bottle.
If you get a Grid then just shut off the power to the Grid and it will shutdown the motor but for your present application I would use the MSD...
