Separate names with a comma.
I first thought that but it comes up in a preset mode that allows it to start while it is booting up. If you turn it on and watch the Amber/green...
You turn the Grid on by a switch after you spin it over,,
Call Bryan at DMPE Inc
Roughly computing in my head the fuel looks pretty good below 8000 rpm so just as a guess I would change that second leanout from a 33 to a 65 and...
I sure have been looking harder for that blower at a track but no luck yet
Nemo you need to email me at Mike.c@mindspring.com
how are your fuel bypasses set up right now. Are this fuel and boost figures all in first gear or what? If you are going to lean it out then you...
I would say it was real fat from your figures. What do a new set of plugs look like after one run? Being that fat would explain all your symptoms....
you may want to consider that the 40% overdrive is too much for a superman blower. Superman blowers are designed to be more efficient at lower...
Marco, it depends on which cam you are using but you need 5.5 to 5.8 gpm while on the Two Step. The if you divide the GPM by the amount of boost...
Timing on Promag is not the same as a regular mag. A regular mag retards as it is put under load and a Promag has a special circuit that keeps the...
A this a roots or a screw. If a roots set the idle return 8.5 to 9.5 the read my earlier post on adjusting idle mixture. I think you are running...
Yes just shut power off to the Grid and keep it simple. Don't need special mag switches or solenoids. If you are running a MSD big red...
Well if you shut the power off to the Grid then it can't be the Grid causing the backfiring that would have to be caused by unburned fuel igniting...
To stop surging at idle especially when using a big pump on a screw blown moter
