Separate names with a comma.
Epoxy resins mixes 1/2 and 1/2 epoxy resins mixes 1/2 and 1/2 epoxy resins mixes 1/2 and 1/2 regular resins for fiberglass you can add more...
i dont know what kind of resin you are using but for repairs i use epoxy resins and they are mixed 1/2 and 1/2 and does not dry that way ( like...
i have ran both dual mag and single mag though dual mags look cool i prefer single mag its cheaper and less headach and you will have a spare mag...
when the motor is warm are hot it will get to the pick up just fine like i said i would run one
i have know from the time i was 8 years old that some day i wanted to drive a funny car and i have drove alot of fast cars i almost quit i in 92...
your welcome you will like the two piece if you need to take it out
i would you dont want the oil running away from the pickup it the shut down the oil pressure will drop till it can pick up more oil thats my thoughts
tow it if you want a race car you blow a burst panel on a run with water in it your screwed and you will probley junk it what was i thinking...
it is a whole lot easier to get out if its in two pieces as in a left and right sides it a pain in the ass if it is one peice to get out i have...
what bore i have a bunch of 4.25 stuff new and used pistons rods rings ect........ very reasonable
some body has way to much time on there hands are needs to slow down on the drinking out in the shop ( lol ) i seen that ride awhile back pretty...
years ago my uncles went from a chevy to a hemi and i ask why the chevy kept blowing the combustion chamber out of the head between the valves ugly
you can get a mother tank from your local welding supply house make a line and fill it yourself and carry it in the trailer with you
dont you mean a taller first gear like a 1.98 or 1.89 first gear that will calm it down
thanks guys
my thoughts would be put a magnet on the clutch pedal and wire it like a trans brake switch even through a delay box if you are the die hard...
Where can i find the bearings for the injector shaft i need one thanks jim
Thats good to know
i had a friend had that problem kept messing up the push rods he ended up raising up the rocker stands .100
my set up came from john medlin we know who he is was good friends with the late george peters i ended up with the car after he passed and in the...
