Separate names with a comma.
i would tighten the gap up 16 thousands is a good number batterys need to spin it fast are it wont fire right try killing it before you run it all...
20% should get you there i had a similar motor i spun 47 over knowing what i know 20% will a good place to start and someone just posted the...
the picture is cool love them old chrys products
well they dont look fat irun a new set each pass when im working on the tune up its hard to tell from the picture it looks like it burning all the...
you deffinitly need a weather station if it ok when it cool it probley way fat when its hot and humid got to lean it down a little on the main
i would leave the weight on the fingers and take some of the base out are put more in depending on where you have it set and why wouldnt you...
my uncles always told me a dime size pulley on top and a manhole cover on the bottom is how you make one run ( lol ) and thats how i started a...
hell turn it 40* over compression is low it art to run 4.90s if it has any balls needs big tires if its a powerglide several years ago i put my...
i do run a lot of clutch . there on beadlocks and its a roots blower car and i leave around 5000 to 5500 rpms works for me
ta/fc 6-1/2 lbs .95 60fts
Mike knows
do you pre lube the push rods i do and use lucas fifth wheel lube but check the lenth and the rockers but i have seen the adjustment be a tad...
a 3.98 -3.99 180 + in the 1/8 should get you down in the teens 220s
mckinney is the only place i have found them www.mckinneycorp.com
i shipped a wheelie bar to the big illand cost 200.00 lost my but on that deal when i offered to pay part of the shipping but my customer was happy
its kinda like a go cart clutch the more rpm the more it locks up add more weight it locks quicker i had one i went to a pedal clutch seems easier...
you only need an 1/8" toe in and if the front end is still shaking you probley dont have enough air in the front tires i have had those shakes...
MAN way to go chris i know its been a long road
i probley have the card you you want i will look tomorrow in the shop i have always put them in 38* at 50th lift and put the cover on it no...
thats better parts than they ran years ago a floater rear housing would be my choice other than that i would think you have some good parts
