Separate names with a comma.
hmmm.... http://www.tricktape.com/browseproducts/LP-Tire-Pens.html Try this site...or type in "tire pens" on google. I found these on another...
Decreasing Power from a Hemi :eek:Hey guys! Finally bought a hemi for my Outlaw 10.5 car. :D Our main concern is obviously over powering the...
Mike how do you get ahold of Leahy? I need to get my Promag 12 and box checked....? Josh
427 sbf, procharged on alcohol, pro mag 12, port nozzles, 30 degrees of timing, plugs gapped at .016. Broke at 5700 RPM. Was putting 5.9 gpm at...
So which valve is better...stainless or titanium valves??? I run titanium in both exhaust and intake. On the dyno we burnt an exhaust valve...
...that's a very good question. We capped off the hi press relief and idle check, and left the port and hat outlets open.
No, it's just a Enderle K Valve. I wasn't sure if 75% was a good place to start or not on the leak down. Is it possible to have the spool 180...
Hey all! Getting ready to take our blown/alky small block ford to the engine dyno. We ran it in the car first to make sure all was well. We...
Anyone ever moved their barrel valve (K valve) to a remote location because of clearance issues and ran it using a cable?? Just curious, almost...
excuse my ignorance, but when you guys are referring to "pump sizer" or "pump saver"...is this the same thing? And are you referring to the high...
what's the name of the oil from caterpiller used in the bruno's??? Josh
Hey all...I run a blown alky small block ford. We're going to get the heads and block o-ringed (double o-ring, one in the block, one in the head,...
Okay so when you use a leak down tester to test the flow of your jets, are you simply looking for a leak down number that is less/more than the...
I got a stupid question. If you only want to change one port nozzle, and so you compensate by doing the opposite w/ the main jet to keep pressure...
Cons-definately the cost when you consider the initial hit (about 2k) and the fact that the alcohol tends to shorten the life of the O2 sensor, so...
Chris, Since nobody replied i'll tell ya what i've learned. The FAST and Innovate system will work w/ alcohol. The problem is a lot of systems...
I agree, especially when the learning curve will take a while. I've looked for that post, any idea what the subject was?? Also, we have...
Hey guys....what advice would you give for someone wanting to get into the hemi world. What's a good starting point as far as what to look for...
HEMIdude, yeah i'd have to agree w/ ya. I'd feel more comfortable w/ all the fuel up front, and i don't need the weight when we're already 200#...
I wish we could put a bigger cell in, but this is in a '68 mustang and we're limited w/ room. We're running a Hiborn 175B-2, we burn about .7 gpm...
