Separate names with a comma.
[IMG] [IMG]
Well, after having a problem with oil pressure tomorrow during our test session, i brought it home and started digging today. I found that the oil...
The guys will be in Sac next weekend. I have noticed i'm about the only NE1 car with canards. Most 7.0Pro cars don't seem to have them
When my heads were done the first time....i had .001 guide clearance. On the first full pull, it grabbed an exhaust valve. now they are all...
the -10 is one step colder. How are your -9's reading? I run -9 plugs in my blown alky SBC. I don't lean on it real hard, however. I've ran...
BTW, i find it more interesting that NO ONE in Sac (lots of speed shops) has any injector gaskets....GRRRRRRRRRRRRRR
Thanks for the feedback. It's together with paper for a test & tune session this friday. I'll see how it works. I have to pull it apart to...
No one in sac has an injector gasket. I'm considering making two of them, or using 'Right-Stuff'. Has anyone ever used it for injector gaskets?
Ditto Rick. Don't see the problem in doing that way. I've bought some stuff from friends and sent money after i got it, but that was with a VERY...
Or turn up the air. If the air goes away, catch it with pulleys. (that's why they come in all sizes. :))
PM? Share the wealth
Thanks, i think Bill will be here next weekend for the A/F HRHS race. I will do that. And, they aren't as close as the first picture makes...
I made mine. It is a 10" swivel caster, pnuematic tire, and it cradles the frame rails. The front tires are about 16" off the ground when on the...
Hindering, like they are in dirty air and not helping that much?
I've got dual element canards on my 200" FED NE1 car. Are they working at all? I've been tempted to pull them off....
DJ. I've seen RJS that are nice suits. DJ is such a killer company.
We ran an air kill on our MSD44 for years. i see your point however
NGK 5671-10 (aluminum heads???) Or good ol' B10ES or BR10ES
Aint it GREAT. I remember my first hits. Such a rush. Blower converters are a different breed. The torque of a blower motor will run over a...
8MM. 90% of the cars use 8MM. If you use 8MM too, you can bum pullies if needed. 8MM will hold a lot of OD.
