Separate names with a comma.
Im not sure how much power a 990 pump takes to turn, but we run an injected SBC with a belt driven pump, a narrow 1/2" wide 3/8" pitch trapazoidal...
Ive always used a chop saw with an abrasive wheel to cut, but I wonder if the cold saw blade would be nicer on the steel. As far as notching I use...
Yes yes, I agree. Do all your machine work after you fill the block, whatever it may be, line bore, decking, boring, whatever it may be, fill the...
Boost pressure on the back side of the valve is trying to open it, multiply your valve area by your boost pressure and I bet you'll be suprised....
I dont have any answers for anyone just more questions, I was goin to put up a new post on the Cometic gaskets but seen this one. I'm building a...
FlyingPig I am close to Muscatine around Davenport, I'd be glad to trade stories with you or ideas or just plain old B.S. Im not saying I know...
I will have to agree with Will, talk to an injection expert, I've always had great luck with Kinsler, they have good parts and good advise.
I dont think there is such a thing as too big, my setup is close just bigger, im running run a 572 mopar wedge with Crowers old 8 port blower hat,...
Thanks for the imput, good information is always welcome. I've run with the NPCA several times and like it so far, my cousin runs a Jr Fuel...
Yea I know im pushing those tires pretty hard, but that about all that will fit, and I dont like nostagia cars with superwide 16"x33" tires, they...
I just wanted to get some opinions. Im building a blown alky 572" Mopar wedge, I know its kinda big but its what I have, here is my combo....
