Separate names with a comma.
James.....we run a similar combo to yours, just a little longer stroke. i am pretty sure that the piston we use will work with most fuel heads,...
i agree with Dave.....thats how we do it as well. if the heads are off, i use 2 short straps, and go thru the pushrod holes in the deck of the...
i would love to have a copy as well. please send to fast378@woh.rr.com thanks
Mike is a very smart man......listen to him. sometimes you buy the best parts that are supposed to work, and you still have problems.....go with...
Glenn.. you can order directly from Tech-Line....or Manton. you guys going to run the PTO this year? we are going to try a few. Darren Russell
i would put it on jack stands and take a look at everything. see if anything is binding like LeWhite says. check all steering linkage when...
i agree with the tech line suggestion.....that stuff works great. Darren Russell
if you have access to a mill..........make a new one, or make a 1/4" plate and put between them. hope this helps Darren Russell
Santo.... on a 4.375 bore when i cc'd our motor this winter .....for every .010 on the gasket, you lose or gain right at 1/3 of a point. .050...
it will take 2 weeks.....because a bicycle doesn't have doors.:D Darren Russell
well....it looks like Ozzy is a realist.....been there myself a time or two.:D Darren Russell
what if you don't run a battery? ground to chassis? Darren Russell
i have a set of used 4.375 pistons, but you would have to buy new rods. we used a .100 tall block with a 4.5 stroke.....had 12 to 1 compression....
John.... you're welcome buddy. good luck this season with the NHRA.....you just about done with the car? Darren Russell
i wouldn't hesitate to buy from Randy......great guy to deal with. you get what you pay for with his system, never heard anything bad from one of...
what motor? blown alky? nitro? please give a little more information about your combo. Darren Russell
i would use a solid copper gasket with o-rings in the head and a receiver groove in the sleeve. we use a thin coat of Copper-Coat by Permatex on...
call Don..... www.gerardot.com super guy to deal with, and he's honest. it only costs a phone call Darren Russell
i called what used to be Trick Titanium today about getting my can re-certed. i talked to this guy, who was really courteous and helpful. i told...
S&W sells one that is crome moly and welds to the chassis. http://www.swracecars.com/Files/pdf/brackets%20and%20tabs.pdf hope this helps...