Separate names with a comma.
mike has the answer, i prefer the Crower. you might also look at the Molinari unit, Bob advertises on here and was THE clutch department for...
yea....what John said.....it really does help
you will get alot of responses for this i think. we have a similar combo...with a little more compression and a 14-71 HH. if i were you i would...
Jeff..... sent you a PM
Mike.....i sent you a PM.
we run a B10ES from NGK, they have a strap like a regular plug. you might want to open up the gap a little with a Mallory mag. i think we ran...
we run ours pretty tight....maybe .001-.003 it seems to work pretty well.
i would have to side with Mike......they are probably really old Waterman....just a hunch
Joe...... when Bob Molinari worked for crower a few years ago, he told me at that time that they made 2 different fingers for a pedal clutch....
i think having a good consistent gauge is definately important, and you can just about spend what ever you want on one...from $40-$400. i bought a...
Mike...... i really have no idea....never thought about it. it has a pretty stout spring in it, i just took it for granted that it was shutting...
instead of a fuel solenoid, we run ours out of the pump....through a one way poppet valve....to the motor....seems to work for us.
we used a regular steel 1/8" pipe plug with a little Permatex pipe sealant. it seemed to work pretty well for us.
about 15 years ago we started using a little Holley blue pump as a primer, it's still going strong. just take the bottom plate off at the end of...
all those people make good stuff, but i would talk to Mark Williams, very nice stuff. we have had the same center section in our car for 11 years,...
you know.....i was thinking this very thing a few months ago. so, i got on the phone to my division tech guy and asked him that very question. i...
the best way is to call TJ or Rich.....and give then the serial number on the blower case. it should be on top near the back where the hat bolts...
a few years ago i really wanted to get one of the new Impact light weight suits. i decided to go shopping around a little, and ended up at Stroud....
Brad Penn.....very good stuff and reasonably priced. 50 wt when its cold, 70 when its really hot. some go 1/2 each to end up with 60 wt. it...
wow........interesting reads over there.