Separate names with a comma.
Computech 3000 https://www.summitracing.com/parts/cpk-3000
The aeration holes are also used to break siphon when you let up so it doesn’t suck fuel after you let up. I have had aeration nozzles and non...
You can still buy them from RBS but at $44 each. Not sure i believe the 50 horsepower gain. The problem is in a back to back test maybe one of the...
The title or subject of the original post is about hat nozzles and not port nozzles. I believe the orignal problem was the spray that came back...
I can understand not using aerated nozzles but you need deflectors on the nozzles in the hat.
Only use a flex hose. You need about 4” of hose coming out of the BV to the flow meter to reduce turbulence same coming out of the flow meter...
Can’t tell in the pictures but are they gas ported?
Well if you take it out and add the fuel to the main jet most likely you will not see any difference in performance because that high speed opens...
I believe the inlet thread on a standard is a -8 orb and a high flow is a -10 orb.
Well obviously having the insert is the best way but screwing them right into the carbon hat is the most common way and seems to work just fine if...
Is this the same company? https://www.bandg.com/bg/type/weather/
Greg is really asking if you have a toe loop on your pedal so if it sticks open then you can pull it shut by pulling up on the toe loop.
What were you filing on the BV? The idle slot? If so did you deburr it after? Is the linkage bar between the BV and hat centered on the swivel...
Yes, you either use data at 8000 rpm or 9000 rpm in any gear you want but that always stays the same. Then put in the pump flow and the port and...
If you want a great alcohol tuning program then get Alky Pro. Go www.alkypro.com. It is the most advanced tuning software out there plus great...
HaHa, you are correct. Brain fart
That is not good for the CS2 to run 250 psi. It will damage the clutch plates.
Depends on what section. With the Bruno that is totally isolated from the CS2. Yes in the Bruno we use the Redline Racing ATF BUT and a big but...
Lenco recommends straight 30w oil. Preferable non detergent. In my opinion that 20 Wt synthetic is probably too slick for a Lenco and the...
Thanks, my mistake