Separate names with a comma.
BAE can do it. Talk to Jeremy Evrist 909.923.1028
Reactor makes a 166 tooth flexplate
The problem with a 168 tooth ring gear is it will not fit inside most cans with the inner shield since the change a few years ago that required...
10 or 11 is just the heat range of the plug. If you mean what is the difference between a B10ES and. 6061 plug then it is the length of the ground...
That NGK B10ES is a good blower plug.
Would not recommend Autolite plugs because the base circle will not color so you cannot read the plugs. There are cheaper NGK plugs available that...
The plug only colors towards the end of the run because that is when it gets hot enough. They will not tell you what is going on at the beginning...
You are not as cold as up here in Maine but nobody races Promods up here. Doesn’t hurt to use gasoline/petrol all the time.
Yea, those are mistakes we never forget. Watched a very fast promod team (name secret) go to the finals in cold weather and grabbed the wrong...
It can happen earlier in the run at the top of a gear and since you completed the run the run it may just show the end run coloring.
Yes it is the same as a powerglide.
Do you adjust the main jet for changes in Density Altitude? That sure is a lot of indicators on cylinder7 for detonation. Have you checked the...
Tuliped valves and loose adjuster nuts is a real good indication of detonation. What did the spark plug look like out of that hole. I know you...
You never said you are first priming it with fuel from a squirt bottle into the hat. The other thing is if it is below 62 F you need to mix the...
No reason for hooking up those five retards to the Electrimotion timer that I can think of. What reason were you thinking of?
Thinking some more on it. The power handling of the diode would depend on what make trans brake setup you have. If it was a Lencodrive you...
I would never use a switch that you would have to remember to flip after burnout. Things happen and you can loose your train of thought and...
The other way is to have two Transbrake buttons. One straight to only the transbrake and one to the transbrake and Grid.
I am only saying to use the toggle switches if needed right at the last minute. I agree use the laptop and not the toggle switches for normal...
Let’s see if I understand correctly. On the Leahy timer it is one timer channel to one solenoid which is one turn on and one turn off per...