Separate names with a comma.
No worries.
Yes i do. because of no glue, they wipe off. i apply fresh 'lube' and reuse.
I bought poster board for mine. Trace out the gasket size, make about 3 at a time, hang them up. i use white grease, no silicone. no leaks,...
I broke high gear last SUnday in the dragster, and it revved pretty hard...... Opinions on replacing the rod bolts? Rods are Eagle 4340, 6"...
I believe it is a 3" line.
Thanks all. We ran the car on Sunday, runs awesome. Of course, when a glide drives thru high gear, it makes a mess in the pan...tore the trans...
I have purchased mine from ART in the past. Great service, great prices.
Rheel sells them for 10 for 120$. I buy take-offs usually. Just bought a handful from Clint Thompson. I only make about 20psi so they last a...
From my few years in Alcohol racing, 14'ish is about premo for injected, i have heard many times that 12 is about as high as you want (for a...
When i started on my combo, i did NOT have it flowed. It took 10-15 passes to get the numbers close. I figured it was cheaper to do that than...
The oil feed holes in the lifters were not passing in front of the oil galleys in the block, so there was no way for oil to have passed from the...
Thanks Brother. I appreciate it.
Ok, let's catch up................... I'm frustrated. Here is a list of things that have changed: - decked block .015 - decked heads...
I have a Drag Champ from Impact. The fresh air is on the left side, not the top. Simpson's don't fit my mellon. They always feel bad....
Thanks Tom for the info. I plan on having my intake cut for an oring, so this helps!
I work on a car with a two step (blown alky), and while on the two step, a lean-out solenoid is activated, pulling the extra fuel out. It's a...
Cuz curiosity killed the cat.
Thanks DT. I appreciate you clearing the water.
Spud has worked with ETC to up the capabilities to deal with 'hot-rodded' mags. Call him, they are pretty cool.
Thanks Tom for steppin up. I take back my Whuttapud comment. :)
